how do i insert a pause to change filiment from cura?

Post Reply
JMarrah
Posts: 6
Joined: Sat Aug 22, 2020 8:13 am

how do i insert a pause to change filiment from cura?

Post by JMarrah » Sun Sep 13, 2020 10:44 am

the pause at layer height does nothing but send my print off the deepend of spaghetti land.

I want to be able to change color mid-print on specific layers with a single extruder.

Please help!

Marcellus
Posts: 14
Joined: Tue Jul 02, 2019 11:25 pm

Re: how do i insert a pause to change filiment from cura?

Post by Marcellus » Sat Sep 26, 2020 3:38 pm

Hello
You cant do that! Look to the A30 Forum (not pro).

The problem is the firmware smartto!
You buy that printer? I do that mistake too. :oops: :cry:

All other 3d-printer can pause while printing with sd-card with the gcode. Not printer with smartto. We cant use the nice cura functions.

Hello Geeetech delete smartto from all your pc and printer please, then install marlin! All your customers are angry, just look at the forums. WE HATE SMARTTO!!! :twisted:

Please give us a fast and simple method to pause with gcode (for example at layer xx) and then resume with the LCD-button. And for ALL A30 Versions. All other method are not good!

Greets from an angry customer! :evil:

Post Reply