nozzle temp always 133/134 deg. C

Post Reply
alfvv12
Posts: 29
Joined: Sun Jul 12, 2020 6:06 pm

nozzle temp always 133/134 deg. C

Post by alfvv12 » Thu Nov 18, 2021 2:37 am

hi.
A20T gt2560 V4.1.

nozzle temp. in Display shows 133 to 134 deg celsius. always.

if the hotend cable is unplugged or temp. sensor is broken, the temp. on display normally shows -14 deg. C on other geeetech printers.

this one always same temp 134 deg.
i changed nozzle sensor, the same result.

any idea? is board broken?

thx

Eliza89
Posts: 1
Joined: Wed Dec 01, 2021 1:43 pm

Re: nozzle temp always 133/134 deg. C

Post by Eliza89 » Wed Dec 01, 2021 1:45 pm

Body temperature below 95°F (35°C) is considered abnormally low, and the condition is known as hypothermia. This happens when your body loses heat faster than it can produce heat. Hypothermia is a medical emergency, which if left untreated can lead to brain damage and cardiac failure.
prepaidcardstatus

Post Reply