[solved][Opgelost]head extruder a20t not working good

Post Reply
andrevanderweide
Posts: 14
Joined: Sun Dec 08, 2019 2:28 am
Location: almere Netherlands

[solved][Opgelost]head extruder a20t not working good

Post by andrevanderweide » Sat Mar 28, 2020 5:58 pm

the head is not working for 1 color the other working fine i did complete clean of the head but stil no luck tempature and extruder motors working al good that is not the problem.

also with the firmware is original its the same.

greatings from the Netherlands
Last edited by andrevanderweide on Sat Apr 04, 2020 3:31 pm, edited 1 time in total.
Creality Ender 3v2
Creality S10 Pro Marlin 2.0

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: head extruder a20t not working good

Post by William » Sat Mar 28, 2020 6:43 pm

Hi, Can you provide print pictures or videos?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

andrevanderweide
Posts: 14
Joined: Sun Dec 08, 2019 2:28 am
Location: almere Netherlands

Re: head extruder a20t not working good

Post by andrevanderweide » Sat Mar 28, 2020 8:04 pm

i did make a little testprint with change the 3 colors its with original geeetech firmware only its a magnetic bed of creality :mrgreen:
Attachments
WIN_20200328_13_02_52_Pro.jpg
WIN_20200328_13_02_52_Pro.jpg (64.15 KiB) Viewed 12275 times
Creality Ender 3v2
Creality S10 Pro Marlin 2.0

andrevanderweide
Posts: 14
Joined: Sun Dec 08, 2019 2:28 am
Location: almere Netherlands

Re: head extruder a20t not working good

Post by andrevanderweide » Sun Mar 29, 2020 4:16 pm

i find the problem the steel balls where tight in the head i clean the head again and now its working normal with the original firmware.

And now back on vert his b483 Marlin 2 version i think is the best.
Creality Ender 3v2
Creality S10 Pro Marlin 2.0

Oli99959
Posts: 13
Joined: Mon Mar 23, 2020 11:53 pm

Re: head extruder a20t not working good

Post by Oli99959 » Fri Apr 03, 2020 2:41 am

Hi,

I have the same issue but I don't understand what you mean. Could you post a picture of these "steel balls" please?

andrevanderweide
Posts: 14
Joined: Sun Dec 08, 2019 2:28 am
Location: almere Netherlands

Re: head extruder a20t not working good

Post by andrevanderweide » Fri Apr 03, 2020 3:34 am

there for every filament tree imbus with behind a second imbus and there behind are the steelballs
Attachments
Geeetech_headbal.jpg
Geeetech_headbal.jpg (32.7 KiB) Viewed 12206 times
Creality Ender 3v2
Creality S10 Pro Marlin 2.0

Oli99959
Posts: 13
Joined: Mon Mar 23, 2020 11:53 pm

Re: [solved][Opgelost]head extruder a20t not working good

Post by Oli99959 » Sun Apr 05, 2020 11:03 pm

Thank you for your reply.

I understand that what you call "imbus" is what I would call hex screw / Allen screw in my country.

I tried to unscrew the 1st "imbus", but I did not manage to make it turn at all.

I used the key provided by Geeetech. It seems to fit just right in it, but when I turn it slips inside. I feel that I am damaging the "imbus".

andrevanderweide
Posts: 14
Joined: Sun Dec 08, 2019 2:28 am
Location: almere Netherlands

Re: [solved][Opgelost]head extruder a20t not working good

Post by andrevanderweide » Mon Apr 06, 2020 1:04 am

make the head hot with hair dryer or paint burner when you have the rest removed
sometimes then the get lose
Creality Ender 3v2
Creality S10 Pro Marlin 2.0

Post Reply