blank blue screen

Post Reply
Ade O
Posts: 37
Joined: Thu Mar 26, 2020 7:10 am

blank blue screen

Post by Ade O » Sat May 23, 2020 6:34 am

ok so I just installed a nice new 3d touch but as the firmware was being flashed to the printer via cura the connection to the printer failed so now
the lcd is blank and even though the pc seems to connect to it via the usual com9 neither cura or easy print says its not connected is there a way to fix this

Ade O
Posts: 37
Joined: Thu Mar 26, 2020 7:10 am

Re: blank blue screen

Post by Ade O » Sat May 23, 2020 6:44 am

the saddest thing of all is that I was getting some beautiful prints off but thought my life could be made easier for levelling the bed with the 3d touch and now my printer is dead and has become a large humming paper weight
oh please say there is a fix

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: blank blue screen

Post by William » Sat May 23, 2020 9:46 am

Hi, try to re-burn the firm
Firmware upload instruction .rar
(134.35 KiB) Downloaded 572 times
ware, you can refer to this:
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Ade O
Posts: 37
Joined: Thu Mar 26, 2020 7:10 am

Re: blank blue screen

Post by Ade O » Sat May 23, 2020 12:11 pm

thank you william for your reply ill give it a go

fingers crossed

Ade O
Posts: 37
Joined: Thu Mar 26, 2020 7:10 am

Re: blank blue screen

Post by Ade O » Sat May 23, 2020 1:20 pm

oh William my friend first attempt failed
it wouldn't do it back to 1.1.8 no bl touch
but second attempt with 1.1.8 with bl touch success

back up with you ********* STAR *********

I DONT KNOW WHAT ID DO WITHOUT YOU

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: blank blue screen

Post by William » Sat May 23, 2020 5:26 pm

Hi,i s it normal now?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

mrjohnmain
Posts: 2
Joined: Sun Oct 18, 2020 9:07 pm

Re: blank blue screen

Post by mrjohnmain » Mon Oct 19, 2020 4:19 pm

FYI I had this exact thing, except I couldn't connect via USB either. Geeetech support told me that using the 4.1 firmware instead of the 4.0 bricked my board. They've agreed to send me a new one given that there was no warning, and a minor version upgrade shouldn't produce such dramatic consequences!

Suggy
Posts: 31
Joined: Tue Oct 11, 2016 1:13 am

Re: blank blue screen

Post by Suggy » Sun Nov 08, 2020 5:28 pm

Sounds like you've erased the bootloader. Re-install boot loader and re-flash and you should be good to go

Tomdoss
Posts: 2
Joined: Mon May 23, 2022 9:26 pm

Re: blank blue screen

Post by Tomdoss » Mon May 23, 2022 11:22 pm

Hi
How to re-install bootloader?

Post Reply