Extruder order

Post Reply
Posts: 1
Joined: Sun Jan 10, 2021 10:08 pm

Extruder order

Post by lordzarcon » Sun Jan 10, 2021 10:19 pm

Hi everyone, I recently bought an A20M. Today I did the assembly but it is not clear to me the order of the two extruders.
In some videos, looking at the machine from behind, extruder 0 (E0) must be on the left, while extruder 1 (E1) must be on the right.
Is this thing correct? I have seen this setting on some videos, but in many others the exact opposite. What should be the correct fit?

travelling kiwi
Posts: 4
Joined: Thu Jan 07, 2021 5:21 am

Re: Extruder order

Post by travelling kiwi » Tue Jan 12, 2021 3:25 am

I too recieved my A20M today... I'm still waiting for the 3D Touch sensor to turn up (Wednesday), and I have questions over the print bed... But to answer your question, I believe that looking at the printer from the front, E0 is on the left. Purely by the fact that the cables probably won't reach any other way

Post Reply