No LCD after fan short
Posted: Mon Jan 04, 2021 5:29 am
Hello all, first post.
I just recently had a fan short out and it immediately shut down my machine. I checked the power supply and its still outputting 24v. the board its self has a red LED still on. Power switch lights up, but there appears to be no power to the LCD screen. My first thought was something on the small power distribution board that the fans plug into (on the hot end gantry), but i have that unplugged with no change to the LCD.
Is there something on the board or the LCD board i can test to figure this out? thanks
I just recently had a fan short out and it immediately shut down my machine. I checked the power supply and its still outputting 24v. the board its self has a red LED still on. Power switch lights up, but there appears to be no power to the LCD screen. My first thought was something on the small power distribution board that the fans plug into (on the hot end gantry), but i have that unplugged with no change to the LCD.
Is there something on the board or the LCD board i can test to figure this out? thanks