Calibrating : Printed object exact dimention as STL file

Post Reply
Nepheris
Posts: 7
Joined: Thu Feb 13, 2020 1:37 pm

Calibrating : Printed object exact dimention as STL file

Post by Nepheris » Tue May 12, 2020 2:35 am

Hello,

Object printed size is not the size is not the same as the dimention of the STL files. Slighly smaller, ... I don"t see retraction issues on my print( but I bright new in 3D printing, this is my first printer !).
Can you please help me to check what parameter to adjust ( Printer setting ?, filament setting ?) and what test should I do to improve this point.

i would like to print some fonctional object and then correct dimesion with the best accurancy possible ( +/- 0.5mm at least accurency would be requiered).

Thanks for You help

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Calibrating : Printed object exact dimention as STL file

Post by William » Tue May 12, 2020 11:37 am

Hi,what slicing software do you use, Cura?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply