Can you write text on flat surface (hotplate side)

Post Reply
DemonDNF
Posts: 1
Joined: Sat Jan 11, 2020 12:16 pm

Can you write text on flat surface (hotplate side)

Post by DemonDNF » Sat Jan 11, 2020 12:27 pm

Hi, I'm looking at the A20M on amazon and wanted to know if this printer can print fine text within the "top" finished surface. My goal is to print a part with incriptions on it; similar to text on a remote, television, radio or other devices.

Has anyone achieved this? Any pictures?

Is there a sample print that does this function to help calibration?

My plan is to write at least nozzle width (.04).

Thanks!
Last edited by DemonDNF on Thu Jan 16, 2020 12:23 pm, edited 2 times in total.

Jarda3d
Posts: 184
Joined: Sat Jan 26, 2019 8:42 am

Re: White text on black surface

Post by Jarda3d » Mon Jan 13, 2020 3:16 am

Use laser with appropriate material coating, not 3D printer.
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests