Page 1 of 1

A20M firmware

Posted: Fri Jan 03, 2020 3:31 am
by pawien
I want to flash my A20M on Marlin 2.xx with Arduino.

Who has conf.h and conf.adv for me. with 3dtouch.

Re: A20M firmware

Posted: Fri Jan 03, 2020 9:39 am
by William
:D Hi, Currently you can use the hex format firmware on the official website,

https://www.geeetech.com/download.html?download_id=33

Then upload it using the firmware kit.

Or look for the vert setting.

Re: A20M firmware

Posted: Fri Jan 03, 2020 5:39 pm
by pawien
Thank you

Re: A20M firmware

Posted: Fri Jan 03, 2020 5:44 pm
by pawien
HI
I do not find it

Re: A20M firmware

Posted: Fri Jan 03, 2020 5:59 pm
by William
Hi,You can download the corresponding firmware you need to download here:
L}SB83AN9AHV}7452RIBGEL.png
L}SB83AN9AHV}7452RIBGEL.png (34.77 KiB) Viewed 8554 times

Re: A20M firmware

Posted: Fri Jan 03, 2020 6:47 pm
by pawien
HI
Thank you
But I wanted the config.h with 3d touch because I can set it to German.
I would like to use Arduino 1.1.9 or 2.0

Re: A20M firmware

Posted: Sat Jan 04, 2020 9:09 am
by William
Hi,If so, you can look up the settings for vert.