A20M firmware

Post Reply
pawien
Posts: 27
Joined: Thu Dec 27, 2018 2:25 am

A20M firmware

Post by pawien » Fri Jan 03, 2020 3:31 am

I want to flash my A20M on Marlin 2.xx with Arduino.

Who has conf.h and conf.adv for me. with 3dtouch.

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Fri Jan 03, 2020 9:39 am

:D Hi, Currently you can use the hex format firmware on the official website,

https://www.geeetech.com/download.html?download_id=33

Then upload it using the firmware kit.

Or look for the vert setting.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 27
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 5:39 pm

Thank you

pawien
Posts: 27
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 5:44 pm

HI
I do not find it

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Fri Jan 03, 2020 5:59 pm

Hi,You can download the corresponding firmware you need to download here:
L}SB83AN9AHV}7452RIBGEL.png
L}SB83AN9AHV}7452RIBGEL.png (34.77 KiB) Viewed 486 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pawien
Posts: 27
Joined: Thu Dec 27, 2018 2:25 am

Re: A20M firmware

Post by pawien » Fri Jan 03, 2020 6:47 pm

HI
Thank you
But I wanted the config.h with 3d touch because I can set it to German.
I would like to use Arduino 1.1.9 or 2.0

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: A20M firmware

Post by William » Sat Jan 04, 2020 9:09 am

Hi,If so, you can look up the settings for vert.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
vert
Site Admin
Posts: 1015
Joined: Wed Nov 21, 2018 3:50 pm
Location: Marlin Dev
Contact:

Re: A20M firmware

Post by vert » Mon Jan 13, 2020 4:20 pm

use my fork links in the signature.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests