Linear advance, extruder very noisy

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Linear advance, extruder very noisy

Post by DzzD » Sun Nov 17, 2019 7:13 am

Hello, I would like to know if is that normal that the extruder make a lot of noise when Linear Advance is enabled?

PS: I am using TMC2208 on extrudeur

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Linear advance, extruder very noisy

Post by William » Mon Nov 18, 2019 9:33 am

:D Hi, You can provide a specific video.
So that we can solve the problem better.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Tue Nov 19, 2019 2:04 am

Hi, You can provide a specific video
Ok I will do that, but for now I have another problem more important. I notice that retractation seems to be a lot slower than my slicer setting 30mm/s, when I look to the extruder while printing it look more like 15 or 10 mm/s, any idea ? (Marlin 2.0)

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Tue Nov 19, 2019 3:52 am

thanks ! It is probably related even If I use software retract and not G10/G11.

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Tue Nov 19, 2019 6:09 am

It is ok !

At first I tried your latest Geeetech Marlin 2.0 release but unfortunatly it was not working better, then I realised that your latest build did not contains the modifications in planner.cpp, so I've integrated the modifications from here (https://github.com/MarlinFirmware/Marli ... 1ec2e75228) and now retraction is as fast as it should.

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Tue Nov 19, 2019 6:24 am

Also Linear Advance is no more noisy, don't know if it come from the latest "vert" Marlin 2.0 Geeetech release or from the patch in planner.cpp, but now it work silently

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Wed Nov 20, 2019 2:05 am

Another day, another problem : now one extruder stops extruding (I mean the stepper motor stop moving) with some models, and usually on first layer but it print well others biggers model, any idea ?

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Wed Nov 20, 2019 5:44 am

It stop at first layer, so very very small, but I can print a 30x30x30 cube without problem, also the extruders stepper drivers are both cold, wich is normal as they stop at start print, it extrude about 50mm and stop for some models, I will try your last build (does it include Mix extruder speed retraction patch ?)

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Wed Nov 20, 2019 6:03 am

Same problem with last build :/

Side note : LCD info screen (first screen) is buggy on latest build

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Linear advance, extruder very noisy

Post by DzzD » Wed Nov 20, 2019 6:31 am

vert wrote:
Wed Nov 20, 2019 6:09 am
the forum is not the ideal place for discussion the server is very slow and the posting limits prevent discussion suggest using my discord.
https://discord.gg/brq79WQ
Ok I will do that next time, I dont know Discord it will be interresting to discover.

Last post for tonight but important for user facing the same issue : I tried disabling Linear Advance and it works ! (Setting it to 0 does not work, I have disabled it in Configuration_adv.h)

Post Reply