temp is too low

ericdu62
Posts: 6
Joined: Sun Sep 01, 2019 1:05 pm

temp is too low

Post by ericdu62 » Fri Oct 11, 2019 10:17 pm

=> i am trench ;)

Actually, print stopped because the lcd message is (look picture)
==>> TEMP IS TOO LOW....

After this message, the hothend cooldown ans print is stopped...

Do you have hello for me ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: temp is too low

Post by William » Sat Oct 12, 2019 9:15 am

Hi,You can check if your hot end thermistor is fully connected.
If fully accessible, try measuring the thermistor at the hot end.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ericdu62
Posts: 6
Joined: Sun Sep 01, 2019 1:05 pm

Re: temp is too low

Post by ericdu62 » Sat Oct 12, 2019 1:12 pm

Hi,
If thermistor disconnect, the message is différent (i have testing)

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: temp is too low

Post by William » Sat Oct 12, 2019 1:27 pm

:D Hi,If the hot-end thermistor is not connected to the screen and the display temperature should be -14°,
you can try to measure the thermistor at the hot end.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ericdu62
Posts: 6
Joined: Sun Sep 01, 2019 1:05 pm

Re: temp is too low

Post by ericdu62 » Sat Oct 12, 2019 3:15 pm

how to measure at the end? when I dismounted, the temperature given by the probe is equal to that of the temperature of the piece and when I put it in the fingers, it goes up ... apparently it reacts correctly ...

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: temp is too low

Post by William » Sat Oct 12, 2019 3:22 pm

:D Use a multimeter to measure the thermistor resistance at the hot end,
I am not very clear what you mean, can you provide a specific video?
So that we can solve the problem better.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
YvonGeee
Posts: 23
Joined: Thu Oct 03, 2019 7:20 pm
Location: Bretagne, France

Re: temp is too low

Post by YvonGeee » Mon Oct 14, 2019 7:46 pm

Eric,

Does this happens when you start printing or later during the print?

Yvon

ericdu62
Posts: 6
Joined: Sun Sep 01, 2019 1:05 pm

Re: temp is too low

Post by ericdu62 » Sat Nov 09, 2019 5:20 pm

hello sorry for the delay.
this happens near the end of the print. In the meantime, I changed the heating cartridge, but it is still the same

User avatar
YvonGeee
Posts: 23
Joined: Thu Oct 03, 2019 7:20 pm
Location: Bretagne, France

Re: temp is too low

Post by YvonGeee » Thu Nov 14, 2019 11:29 pm

it always happen, even on small prints?

Can you check your gcode to see if there is no unwanted "stop heating" code before the end?

kohefef
Posts: 1
Joined: Wed Aug 26, 2020 1:53 pm

Re: temp is too low

Post by kohefef » Wed Aug 26, 2020 1:53 pm

The same problem comes to me and I am still trying to fix it but couldn’t solve it. if you find the solution to this problem with mba custom paper writing service reviews then let us know because I am trying to find it and nothing happening and I want it.

Post Reply