Bigger nozzle for faster printing

Post Reply
vismark
Posts: 1
Joined: Thu Mar 25, 2021 3:17 pm

Bigger nozzle for faster printing

Post by vismark » Thu Mar 25, 2021 6:08 pm

I'm new to 3d printing and the A20 is my first printer.
I'd like to use bigger nozzles (like 0.6 or 0.8 mm) instead of the standard 0.4 mm to achieve faster print times.
Ideally I would like to use a 0.8 nozzle with 0.6 layer height when printing fairly large objects where definition is not important.

Is the standard A20 suitable for printing with 0.8 nozzle / 1.75 filament or does it need hardware mods?

Post Reply