Temperature problem

Post Reply
Paul Gee
Posts: 1
Joined: Tue Mar 02, 2021 1:48 am

Temperature problem

Post by Paul Gee » Fri Mar 05, 2021 7:49 pm

Geee A20.jpg
Geee A20.jpg (3.9 MiB) Viewed 2537 times
Geee A20 2.jpg
Geee A20 2.jpg (3.87 MiB) Viewed 2537 times
I went into 'Control' menu to adj temp & Heating Failed came up so I reset & it showed -14 deg at the head.
Each time I try to print or set temp the same thing happens, can anyone help me.

Richard457
Posts: 1
Joined: Mon Mar 15, 2021 5:09 pm

Re: Temperature problem

Post by Richard457 » Mon Mar 15, 2021 5:14 pm

You can change the "preheat PLA" temperature settings via the printer menu >control>temp>preheat PLA settings - don't forget to save changes. When I hit preheat PLA on my printer, then hit print on a file, the machine will heat to preheat PLA settings, then change temp to those set in slicer once the file is initiated.

garageband

Post Reply