I guess I do need to learn first how to do it!
Posted: Sat Oct 19, 2019 9:29 pm
Hey everyone,
I have an A20M, but when i try to use the color mixing features, it simply extrudes both colors at the sane time, so that it comes out where the extruded filament is half one color and half the other, and not mixed. ive tried turning up the temperature and slowing the speed, but to no effect. also ive had bed adhesion problems iphone trade in. my solution to the bed adhesion has been copious amounts of elmers glue stick, but there has to be a better way? Also I cannot make dual color prints, it just makes either a mix of the two like described above, or jams very quickly. also, in between colors, it waits and tries to heat the nozzle? idk why this happens, i would LOVE some help with this.
I have an A20M, but when i try to use the color mixing features, it simply extrudes both colors at the sane time, so that it comes out where the extruded filament is half one color and half the other, and not mixed. ive tried turning up the temperature and slowing the speed, but to no effect. also ive had bed adhesion problems iphone trade in. my solution to the bed adhesion has been copious amounts of elmers glue stick, but there has to be a better way? Also I cannot make dual color prints, it just makes either a mix of the two like described above, or jams very quickly. also, in between colors, it waits and tries to heat the nozzle? idk why this happens, i would LOVE some help with this.