Page 1 of 1

Cura profile for Geeetech A20

Posted: Wed Apr 24, 2019 11:21 am
by William
Hi guys! :o
Are you can't find Geeetech A20 on Cura?
Don't worry
Refer to these:
------------------------------ :D --------------------------------------------------
------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code( 2019/1/7)
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer(2019/1/23)
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)






1.Download Profile for Geeetech 3Dprinter
Cura4.0 resources.zip
(158.48 KiB) Downloaded 2481 times
Download the PLA filament profile for A10M
Geeetech-pla.xml.zip
(932 Bytes) Downloaded 1679 times

------------------------------ :D --------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder
Cura-1.png
Cura-1.png (76.4 KiB) Viewed 20518 times
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0
Cura-2.png
Cura-2.png (127.3 KiB) Viewed 20518 times
Cura-3.png
Cura-3.png (127.9 KiB) Viewed 20518 times
Cura-4.png
Cura-4.png (70.33 KiB) Viewed 20518 times
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Import the PLA filament profile for Geeetech A10M
Cura-5.png
Cura-5.png (25.54 KiB) Viewed 20518 times
Cura-6.png
Cura-6.png (61.65 KiB) Viewed 20518 times

4.Done!Enjoy it!

Re: Cura profile for Geeetech A20

Posted: Fri Jan 24, 2020 1:37 am
by Time
hi Guys

what I have to do when using cura for mac?

Re: Cura profile for Geeetech A20

Posted: Mon Mar 02, 2020 5:02 pm
by JuMe
Jetzt ist die Cura 4.5 da. Gibt es inzwischen neue Setting für den A20M? Ich meine, die bisherigen sind veraltet und es gibt sicher neue Erkenntnisse.
------------------
Now the Cura 4.5 is here. Are there new settings for the A20M in the meantime? I mean, the previous ones are outdated and there are certainly new findings.