Wall layer becomes detached

Post Reply
Buzza
Posts: 1
Joined: Sun Sep 27, 2020 7:25 pm

Wall layer becomes detached

Post by Buzza » Sun Sep 27, 2020 7:37 pm

Hi

I've just mov4ed from an XYZ printer to the A20 and am having issues with the wall layer that I haven't seen before.

They seem to be printed as single lines and don't bond to each other.

When the model cools the outer layer of the walls is loose and I have to cut it off.

I've tried increasing the overlap of infill but this didn't help

Has anyone else got this issue and a solution?

Thanks

alidaclark
Posts: 1
Joined: Fri Oct 23, 2020 10:39 am

Re: Wall layer becomes detached

Post by alidaclark » Fri Oct 23, 2020 11:07 am

I encountered the same problem and have not found a reasonable solution, do you have a solution?

MWC
Posts: 4
Joined: Wed Nov 11, 2020 9:28 am

Re: Wall layer becomes detached

Post by MWC » Sun Nov 15, 2020 11:05 pm

Hi

I found that if you start with a slow speed frist print layer, plus a higher hot bed, this will fix your issus,

let it do about 19 layers and then speed back up to 100%,

when it is warming up go to the tune setting and you can set it all up there

MWC
Posts: 4
Joined: Wed Nov 11, 2020 9:28 am

Re: Wall layer becomes detached

Post by MWC » Sun Nov 15, 2020 11:26 pm


geraldmmiller
Posts: 1
Joined: Sat Jul 24, 2021 2:17 pm
Contact:

Re: Wall layer becomes detached

Post by geraldmmiller » Sat Jul 24, 2021 2:25 pm

@mwc Thank you so much for really offering a solution to this problem, those who can't solve the problem will be grateful to you.

noxplayer
Posts: 1
Joined: Fri Feb 04, 2022 12:24 pm
Contact:

Re: Wall layer becomes detached

Post by noxplayer » Fri Feb 04, 2022 12:31 pm

I also encountered the same problem

reminiapk
Posts: 2
Joined: Sun Feb 06, 2022 11:02 am

Re: Wall layer becomes detached

Post by reminiapk » Sun Feb 06, 2022 11:05 am

Had same issue
Remini

reminiapk
Posts: 2
Joined: Sun Feb 06, 2022 11:02 am

Re: Wall layer becomes detached

Post by reminiapk » Tue Apr 05, 2022 10:19 pm


User avatar
mellstroy1122
Posts: 11
Joined: Mon Apr 11, 2022 5:02 pm

Re: Wall layer becomes detached

Post by mellstroy1122 » Mon Apr 11, 2022 5:12 pm

Great

mxplayerapk
Posts: 1
Joined: Wed May 18, 2022 11:28 pm

Re: Wall layer becomes detached

Post by mxplayerapk » Wed May 18, 2022 11:30 pm

MX Player Apk is an app (APK) to catch all the entertainment pieces in one place. The topmost media player you can have on all your Android devices including PC, Mobile, Tablet, Smart TV, and so on.

Post Reply