First layer cracking

Post Reply
sebasd
Posts: 11
Joined: Thu Sep 30, 2021 4:23 pm

First layer cracking

Post by sebasd » Thu Jan 13, 2022 5:20 pm

Hi
I have a strange problem when printing a large object.
The first layer cracks up.

The brim is perfect and sticks very well, but when the bottomlayer is printed, take a look at the image.....
Why does this happen?

Line width is set to 0.32mm
Height 0.3mm (initial layer, all other 0.2)
Temperaure 210
Bed temperature 55 or 60, happens at both temperatures.
Standard speed settings.

As you can see the brim is very well fitted to the bed.

Have been able to print this size before without any problems.

The print bed is very clean. I use the magnetic bed.
PLA is geeetech
Attachments
20220113_093320.jpg
20220113_093320.jpg (249.85 KiB) Viewed 1695 times
Sebastian

OrazioGiunta
Posts: 10
Joined: Wed Jan 13, 2021 11:53 pm

Re: First layer cracking

Post by OrazioGiunta » Wed Jan 19, 2022 9:13 pm

it seems your nozzle hit the bad, have you checked ?

Post Reply