3D Touch mount for Prusa I3 Pro W

Post Reply
User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

3D Touch mount for Prusa I3 Pro W

Post by JustinSB » Wed Dec 06, 2017 3:51 am

I am adding a 3D Touch to my Pro W, but the 3D Touch User Manual only gives links to the .stl files for the Pro B and the Pro X - not the Pro W. Which file should I use for the Pro W, or where can I download a specific Pro W .stl file?
Thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch mount for Prusa I3 Pro W

Post by William » Wed Dec 06, 2017 5:19 pm

You can print the .stl files for the Pro B, these two products are similar.
iiii.png
iiii.png (514.29 KiB) Viewed 24762 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
JustinSB
Posts: 0
Joined: Tue Nov 28, 2017 6:54 am
Location: Deepest, darkest Yorkshire

Re: 3D Touch mount for Prusa I3 Pro W

Post by JustinSB » Wed Dec 06, 2017 6:19 pm

Thanks William, that makes sense. AFAIK, the Pro W is just the Pro B - but laser cut from plywood sheets rather than acrylic. I'm just not 100% sure if everything has precisely the same measurements.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3D Touch mount for Prusa I3 Pro W

Post by William » Thu Dec 07, 2017 11:44 am

Pro b and pro w in the firmware changes only minor differences because they are using the GT2560A + motherboard, the same specifications of the extruder and the overall frame.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply