Geeetech

1.Make sure your bed temp reaches 100~110 degree when you're printing with ABS.
2.Check if the distance between the nozzle and the bed is too large.
3.You can try spreading some ABS glue on the surface of the platform.

Hello, I just bought and put together a prusa i3 aluminum, and am having the reversed x and y stepper motor problem. I downloaded and changed the relevant firmware file, and using win7 and arduino version 1.0.1 as recommended absolutely cannot upload the firmware. It seems to be a usb connection pr...

Hi, i have a prusa i3 pro b and the firmware from the 1. Posting. I have no z offset Menu under Control - Motion. Is that normal? I want so set the offset online by printer for my Auto bedleveling Sensor. You can try flashing the firmware again,it should exist cuz i find the setting "Z offset" on I...

This holder is placed alone,just for the filament,and it doesn't influence your machine i think...
You can adjust the 6 screws if you want it better performance.

Did you watch the following video? https://www.youtube.com/watch?v=7aav0i5cOL4 I remembered the sensor will be waiting for heating at the last measured point(that is the point you mentioned?) after it finished all the points. Also,the printing position at the beginning is determined by the place whe...

Hello everyone, I have a recurring problem on every print... It seems a periodic disturbance to the mechanics but it's all ok. I will upload a pic of the problem because it is difficult to describe the ridges that form. Anyone have the same problem or know how to fix it? :roll: Thanks N.M. Hi, Look...

Thanks for your guys' sharing

Hi, You'd better change a 10A fuse first,do you have a spare one? I have replaced the 10A fuse with a working one and tried it again, but it blew it again. I have an image on how red the wires for the heating element get before it blows, I have also followed this http://www.geeetech.com/forum/viewt...

Hi,
How do you ensure the value is that the problem exists?And are you sure the value is right?

Seems the z axis layer height increases work OK, as seen in the pic, until a certain point. Then it seems to be less than that required as the nozzle is printing the layers and is also pushing the molten filament around. Thus the result seen on the pic. So,i wanna know,every object has the same pro...