Search found 72 matches
- Fri Mar 29, 2019 3:09 pm
- Forum: Control Board
- Topic: GT2560 V3.0 Pinout or how to burn bootloader
- Replies: 7
- Views: 13791
Re: GT2560 V3.0 Pinout or how to burn bootloader
there is a full guide here on the forums on burning a boot loader to the gt2560 V3 should try searching before re-posting something that has been documented. Instead of writing this long sentence, You could have written the link to the full guide. This would have been much more helpfull (even when ...
- Mon Mar 25, 2019 7:17 pm
- Forum: Geeetech I3 Aluminum
- Topic: GT2560 Board from i3 Pro W
- Replies: 4
- Views: 20008
GT2560 Board from i3 Pro W
Hello, I have mounted a 2560 Board from a i3 Pro W to my I3 Aluminium and this works rather fine: IMG_20190323_185346.jpg Here, on the right side, there are only twi distance holders, the board is mounted only with two screws. But it seems to be very stable and I used distance holders on both side o...
- Wed Mar 13, 2019 1:15 am
- Forum: Firmware
- Topic: Upgrade ready
- Replies: 3
- Views: 4566
Upgrade ready
What does it mean?
- Mon Mar 11, 2019 10:26 pm
- Forum: Geeetech I3 Aluminum
- Topic: New PSU cover for i3 Aluminium stand alone PSU!
- Replies: 8
- Views: 48810
New PSU cover for i3 Aluminium stand alone PSU!
New PSU cover for i3 Aluminium stand alone PSU! Mounted on a plate, it can be placed behind or beside the Aluminium printer and switches on/off safely and comfortabel. https://modellbauhuette.dettenbachtal.de/wp-content/uploads/2019/03/IMG_20190309_001147-768x432.jpg https://modellbauhuette.dettenba...
- Fri Mar 08, 2019 6:16 am
- Forum: Geeetech I3 Pro C
- Topic: Shift to the left - why?
- Replies: 1
- Views: 4371
Shift to the left - why?
Any idea, where this shift to the left comes from?
I don't have any idea, what causes this
I don't have any idea, what causes this
- Tue Feb 26, 2019 6:20 pm
- Forum: Geeetech A30 Series
- Topic: Cant see any .gcode files on the sd card
- Replies: 11
- Views: 17031
Re: Cant see any .gcode files on the sd card
Hello William, I don't have an A30 (where I'm very sad about). But as I understand, You can try it by yourself: Test 1: Create a Gcode file with file extension .gcode Test 2: Create the same Gcode file (or rename the other one) with file extension .gco. Normally, both file types (.gcode and .gco) sh...
- Tue Feb 26, 2019 12:52 am
- Forum: Geeetech A30 Series
- Topic: Cant see any .gcode files on the sd card
- Replies: 11
- Views: 17031
Re: Cant see any .gcode files on the sd card
Hello William, as I understand, the SD-Card reader only recognizes *.gco files but no *.gcode files any more. This is a problem of the latest firmware, that only *.gco is recognised but not *.gcode. Therefore, shaking or replacing of the cable will not fix the problem :D A new fir.ware is required! ...
- Sun Feb 24, 2019 1:47 am
- Forum: Geeetech I3 Pro B
- Topic: USB cable burning when printer is powered on
- Replies: 9
- Views: 8624
Re: USB cable burning when printer is powered on
It looks like there is a short circuit from the upper right soldier point to the ground.
Do you have a soldering iron to fix it?
- Fri Feb 22, 2019 1:26 am
- Forum: Firmware
- Topic: New Firmware I3proC_G02_V1.0.04_01
- Replies: 4
- Views: 6212
Re: New Firmware I3proC_G02_V1.0.04_01
Here are some gcodes and my Slic3r Config.
- Tue Feb 19, 2019 3:14 pm
- Forum: Extruder
- Topic: extruder extruding too slow!!!!
- Replies: 2
- Views: 6333
Re: extruder extruding too slow!!!!
Have You tried to change the extrusion multiplier for the filament?
Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.
Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.