Search found 116 matches
- Fri Sep 30, 2016 10:51 am
- Forum: Products FAQ
- Topic: Rostock 301 Z Probe?
- Replies: 25
- Views: 81130
Re: Rostock 301 Z Probe?
We are still working for that, if there's any further news, we'll let you know
- Fri Sep 30, 2016 10:47 am
- Forum: Feedback&Suggestion
- Topic: PWM Fanoutput on Extruder2 Pins?
- Replies: 3
- Views: 7457
Re: PWM Fanoutput on Extruder2 Pins?
There's a PWM fan slot on GT2560 board, didn't you see it?
- Fri Sep 30, 2016 10:33 am
- Forum: Stepper Motor
- Topic: Stepper Motor Drivers
- Replies: 3
- Views: 8210
Re: Stepper Motor Drivers
The subdivision of drv8825 is different form A4988. subdivision.png After changing a4988 to drv8825, the subdivision will be changed form 1/16 to 1/32, this means you need to change steps per mm in firmware refer to this link: http://prusaprinters.org/calculator/#steppers the value of steps per mm s...
- Fri Sep 30, 2016 9:23 am
- Forum: Control Board
- Topic: Delta M301 firmware ( Marlin )
- Replies: 13
- Views: 26399
Re: Delta M301 firmware ( Marlin )
Make sure the bowden tube have been plugged into the tube deepely enough. There's a possibility that the temperature is too high and the filament melt in the PTFE tube or the tube is expanded and then prevent the filament coming out to the nozzle. You can also disassemble the hotend and see if there...
- Thu Sep 29, 2016 9:04 am
- Forum: Products FAQ
- Topic: Rostock 301 Z Probe?
- Replies: 25
- Views: 81130
Re: Rostock 301 Z Probe?
Hi guys,
I'm afraid the printer 301 doesn't support the upgrade of auto-leveling, the firmware is not open source.
So there's no way to modify the firmware...
I'm afraid the printer 301 doesn't support the upgrade of auto-leveling, the firmware is not open source.
So there's no way to modify the firmware...
- Thu Sep 29, 2016 8:57 am
- Forum: Control Board
- Topic: GTM32, GTM32 pro
- Replies: 8
- Views: 15341
Re: GTM32, GTM32 pro
Sorry the boards are not for sale, so no wiki here.
If you guys have any query about the boards, you can contact technical support directly.
If you guys have any query about the boards, you can contact technical support directly.
- Thu Sep 29, 2016 8:49 am
- Forum: Extruder
- Topic: Extruder switch off : MINTEMP when the wires move
- Replies: 6
- Views: 11171
Re: Extruder switch off : MINTEMP when the wires move
Hi,
You need to check this part, in most cases the connection problem of thermistor is due to the poor contact here
You need to check this part, in most cases the connection problem of thermistor is due to the poor contact here
- Thu Sep 29, 2016 8:43 am
- Forum: Extruder
- Topic: Another problem with extruder feeding thread
- Replies: 12
- Views: 19226
Re: Another problem with extruder feeding thread
Seems you need to get a new feeder, you can contact the seller for that.
- Wed Sep 28, 2016 2:15 pm
- Forum: Feedback&Suggestion
- Topic: Hot bed doesn't heat
- Replies: 7
- Views: 10387
Re: Hot bed doesn't heat
Maybe something wrong with the slicer settings, how about try this: M201-PLA-0.4-1.75.zip M201-PLA-0.3-1.75.zip Make sure you've plugged the PTFE tube into hotend deeply enough and the hotend is not clogged. Here's a post, you can take it as a reference: http://www.geeetech.com/forum/viewtopic.php?f...
- Wed Sep 28, 2016 2:03 pm
- Forum: Extruder
- Topic: Extruder min temp error with new complete extruder
- Replies: 2
- Views: 4870
Re: Extruder min temp error with new complete extruder
This means your thermistor is open circuit, please check this part, see if there's a poor contact