Search found 6338 matches

by William
Wed Sep 16, 2020 5:26 pm
Forum: Geeetech A10 Series
Topic: Setting Up Slicer Software For A10M?
Replies: 1
Views: 845

Re: Setting Up Slicer Software For A10M?

Hello, if you want to get the slicing software configuration of A10M, you can log in to the geeetech official website, where there are configuration files for Cura and Repeter-host for download. :D https://www.geeetech.com/download.html?download_id=31 https://www.geeetech.com/download.html?download_...
by William
Wed Sep 16, 2020 10:34 am
Forum: Geeetech A10 Series
Topic: A10 Partcooling fan problem
Replies: 3
Views: 1198

Re: A10 Partcooling fan problem

Hello, if you have some questions about pwm fans, you can refer to the following post. :D
viewtopic.php?f=24&t=17886
Regards
by William
Tue Sep 15, 2020 3:09 pm
Forum: Geeetech A10 Series
Topic: A10 Partcooling fan problem
Replies: 3
Views: 1198

Re: A10 Partcooling fan problem

Hello, maybe there is something wrong with your fan. If you need to replace the accessories, please consult the Ticket system on the Geeetech official website. :D
Regards
by William
Tue Sep 15, 2020 3:04 pm
Forum: Geeetech A10 Series
Topic: Motherboard voltaje adjustment
Replies: 1
Views: 805

Re: Motherboard voltaje adjustment

Hello, according to the formula, I_TripMax= Vref/(8*Rs) the drive resistance is 0.1Ω, so your current is about 1.5A. :D
Regards
by William
Tue Sep 15, 2020 11:49 am
Forum: Geeetech I3 Pro W
Topic: Extruder problem
Replies: 3
Views: 8679

Re: Extruder problem

Hello, you can take a look at the link below, there are very detailed solutions. :D
viewtopic.php?f=19&t=18650
Regards
by William
Mon Sep 14, 2020 5:49 pm
Forum: Geeetech A30 Series
Topic: A30 firmware.
Replies: 39
Views: 59717

Re: A30 firmware.

Hello, you need to download the driver from the link below so that your printer can be recognized by the computer. Afterwards, you can upload the firmware through cura or download the firmware kit. https://www.geeetech.com/download.html?download_id=40 Please download the item of CH340, download the ...
by William
Mon Sep 14, 2020 2:57 pm
Forum: Geeetech I3 Pro W
Topic: Extruder problem
Replies: 3
Views: 8679

Re: Extruder problem

Hello, you can remove the Teflon tube and dredge the extruder with fine wire.
The cause of the blockage may be that your extruder screws are too tight and can be loosened slightly. Or there is a blockage inside the extruder, which will return to normal after cleaning. :D
Regards
by William
Mon Sep 14, 2020 2:50 pm
Forum: Firmware
Topic: Problems MAC OS Firmware Toolkit
Replies: 3
Views: 1165

Re: Problems MAC OS Firmware Toolkit

Hello, please try to open the main program directly in the compression software, or you can replace the compression software. :D
Regards
by William
Mon Sep 14, 2020 1:57 pm
Forum: Geeetech A20
Topic: A20/A20T... Advice Please?
Replies: 5
Views: 9349

Re: A20/A20T... Advice Please?

Hello, if you want to upgrade a20 to a20t, you need to replace the motherboard and then change the firmware to a20t mode. Then you need to replace a 3-in-1 hot end. You also need to purchase two additional extruders, the above upgrade costs may also reach the price of a20t. You can check the relevan...
by William
Sat Sep 12, 2020 11:19 am
Forum: A30 PRO
Topic: Extruder stops working begin of print
Replies: 7
Views: 9924

Re: Extruder stops working begin of print

Hello, by observing your video and pictures, your extruder should have a problem. The link below introduces the cause of the failure and repair methods in great detail. Please refer to the following methods to try to solve the problem. :D
viewtopic.php?f=19&t=17097