Geeetech

Will this work on any boards ? has anyone tryed it ?
what settings will be best for tmc 2100 drivers ?
http://marlinbuilder.robotfuzz.com/

The best way to start is to build an enclosure for your printer.

Is it possible to use these on the control boards supplied with Geeetech printers ?

I use just about any Masking tape/ Blue tape I can get for PLA at 60 Deg.C. on top of a glass bed for PLA . Kapton tape is for HiTemp use ,like hotend insulation and ABS . Kapton tape is also a good base if you do not have a glass bed , the masking tape peels off of Kapton cleaner than a plane Al. b...

Then it can not be ABS . Are you trying pure Acetone or the drug store mixed stuff ?

What is the recommended type of lubrication and the method of it as well ? I was thinking of using lithium based grease but i also have many other types of grease available to me . I always grease the bearings before installing them using a packer i made to force grease in to the bearings but i was ...

In repetier I beleave that in order to 0 the axis you have to home each one useing the little house buttons .

Over on Thingiverse there has been a type of I3 that has parts that may be usable for those that want to make parts for the Al version . Thay will probably need to be modded but the way the frame is made it looks like the top Z axis hook up the same and thats what i was looking for . http://www.thin...

I use masking tape on my bed at 220c for PLA and I use a 5 strand skirt . I have used the expencive blue tape , the cheap brown tape and the cheap green tape from the dollar store . there all good .

That calc gives me a z of 1600.00 .