Geeetech

Hi Adam,maybe you can ask for some help from a Customer Service Executive in digikey's web?

Connect them like this pic

You can try with lower extruder/bed temperature,like the former 200' and the latter 65'.

Hey,my friend.You can try the following instructions,that may be helpful.
http://www.geeetech.com/forum/viewtopic ... 19&t=17097

Yes,you must replace it with another one,cuz every motor has its own corresponding driver module. Here is the purchase link：
http://www.geeetech.com/stepstick-a4988 ... p-577.html

Hello,davi!I guess its the endstop's problem.You can check the status of the printer as the link shows:
http://www.geeetech.com/forum/viewtopic ... 13&t=17042

According to what you said,maybe its the driver module's problem.Swap the the Extruder motor's driver module with the X moter's.

Hello,Edwin!That is to say, there's nothing wrong with the driver.Or maybe there is a problem with your Cura's port setting,the port setting in the printer setting must be "AUTO".You can have a try.

Have you checked your motherboard?Is there anything wrong？

hey，you can download the driver from the following link：
http://www.ftdichip.com/Drivers/D2XX.htm