Search found 40 matches

by buttervonwaffle
Mon Jan 07, 2019 12:46 am
Forum: Geeetech A10 Series
Topic: New A10, prints off centre
Replies: 1
Views: 1742

Re: New A10, prints off centre

Change your printer profile to x - 240mm y - 240mm z - 260mm
That should fix the printer offset and give you the full printable area.
by buttervonwaffle
Mon Jan 07, 2019 12:34 am
Forum: Geeetech A10 Series
Topic: A10 filament feeder motor not feeding
Replies: 3
Views: 2302

Re: A10 filament feeder motor not feeding

Honestly my printer had the same issue. The spring tension most likely isn't good enough to feed the filament. The stock spring they send with the printer has the tension of a noodle. I temporarily fixed mine initially with a penny placed in between the spring and the plastic. Basically like a shim....
by buttervonwaffle
Mon Jan 07, 2019 12:21 am
Forum: Geeetech A10 Series
Topic: Printer Nozzles.
Replies: 8
Views: 2989

Re: Printer Nozzles.

Not a problem. Sorry I forgot you had mentioned that when I typed that all out lol. Glad it's working great for you, been running mine for a month now and I'm loving it, seriously didn't think I could get a 200 dollar printer to print the quality it does. Plus the opensource platform and support fro...
by buttervonwaffle
Sun Jan 06, 2019 1:18 pm
Forum: Geeetech A10 Series
Topic: Layershiftig on y axis
Replies: 13
Views: 8748

Re: Layershiftig on y axis

Yeah I know I didn't know that when I Initially Installed it. Needless to say I was ecstatic to find that out. Jerk was way to picky it really lightens the load when it comes to tuning it in. Thanks for bringing that to the threads and putting that work in, it is greatly appreciated!
by buttervonwaffle
Sun Jan 06, 2019 12:59 pm
Forum: Geeetech A10 Series
Topic: Layershiftig on y axis
Replies: 13
Views: 8748

Re: Layershiftig on y axis

Literally had that issue no matter how slow I printed. The previous gentlemen setup the marlin 2.0 beta which is here It fixed my y axis shifting I was having. Its due to the jerk issue when I uploaded marlin 2.0 without having tweaked the settings I was not getting any jerky motion the printer ran ...
by buttervonwaffle
Sun Jan 06, 2019 12:38 pm
Forum: Geeetech A10 Series
Topic: A10 Cura Profile Settings running Marlin 2.0 Beta 1/5/2018
Replies: 0
Views: 4192

A10 Cura Profile Settings running Marlin 2.0 Beta 1/5/2018

I recently got my Geeetech 3d printer recently setup and would like to share my settings as to help anyone who is curious about where to start for their cura profile. There is a few things I would like to note about my setup ahead of time. 1. My printers temperature is off by about 20 degrees. So wh...
by buttervonwaffle
Sun Jan 06, 2019 7:54 am
Forum: Geeetech A10 Series
Topic: Screen has 2 lines, no info
Replies: 6
Views: 2899

Re: Screen has 2 lines, no info

I just recently had this issue and fixed it by doing this step. If your SD card is sitting in it pull it out and then turn it on the issue should go away, whenever you do firmware updates always ensure your SD card is removed, honestly helps reduce headache and stops oddities from occurring. If it d...
by buttervonwaffle
Sun Jan 06, 2019 3:27 am
Forum: Geeetech A10 Series
Topic: Printer Nozzles.
Replies: 8
Views: 2989

Re: Printer Nozzles.

Oh yeah I hear you, honestly if your new to 3D printing it can be over whelming at first all the different settings hardware adjustments. Now what I mean by hot end upgrade, micro Swiss makes a hotend which can be found here And heres a video explaining it and the installation basically the stock se...
by buttervonwaffle
Sun Jan 06, 2019 1:51 am
Forum: Geeetech A10 Series
Topic: Printer Nozzles.
Replies: 8
Views: 2989

Re: Printer Nozzles.

here is the nozzle style it uses here you can find it elsewhere as well. you can use 0.4mm or you can test out other sizes. the Olson ruby is a fantastic nozzle and as you upgrade hot ends you can do carbon fiber. I personally use nozzles from prusa directly, and have had great success and printing ...
by buttervonwaffle
Sat Jan 05, 2019 6:28 pm
Forum: Geeetech A10 Series
Topic: Possible Solution: A10 Printer wont get past boot load after firmware update
Replies: 0
Views: 1118

Possible Solution: A10 Printer wont get past boot load after firmware update

I recently Update my printer to the Geeetech A10 Marlin 2.0 firmware update which can be found here I found it to be very useful and helped solve some issues I was having with y axis shifting probably because he corrected alot of the jerk you get with these machines. Now back to the original purpose...