Search found 12 matches

by Slacker
Mon Oct 31, 2016 11:15 am
Forum: Print Quality
Topic: Second print not at Z=0 new Prusa i3 M201
Replies: 10
Views: 7392

Re: Second print not at Z=0 new Prusa i3 M201

I tried moving Z up 20mm but it didnt help. FWIW I'm using the latest/v1.0.5 firmware. I also noticed that it looked like it did an operation (maybe a zeroing) before it turned on the extruder heater. The log at this time; > 14:06:54.802 : B:95.0 T0:22.9 T1:22.9 T2:0.0 > 14:06:54.905 : B:95.0 T0:22....
by Slacker
Sun Oct 30, 2016 10:10 am
Forum: Print Quality
Topic: Second print not at Z=0 new Prusa i3 M201
Replies: 10
Views: 7392

Second print not at Z=0 new Prusa i3 M201

Hello. The base of my first print didnt stick on one corner, so I cancelled it. I then reset the Z calibration carefully using 4 different points on the bed, However, now when i start the print job it only gets to within 2-3mm of the bed. If I then re-check the Z start position it returns to the cor...