Search found 1553 matches

by Mark
Wed Apr 27, 2016 3:00 pm
Forum: Print Quality
Topic: Outer size correct - Inner size wrong
Replies: 4
Views: 2669

Re: Outer size correct - Inner size wrong

yes just fine tune the X/Y/Z/E steps so you can improve the precision.
by Mark
Tue Apr 26, 2016 4:18 pm
Forum: Print Quality
Topic: Outer size correct - Inner size wrong
Replies: 4
Views: 2669

Re: Outer size correct - Inner size wrong

how about use this one here:
I3 alu-PLA-0.3-1.75.zip
(1.35 KiB) Downloaded 171 times
by Mark
Tue Apr 26, 2016 4:10 pm
Forum: Firmware
Topic: X-axis problem Prusa I3
Replies: 10
Views: 9031

Re: X-axis problem Prusa I3

I think this is fine, as long as the object is in the center of the print bed, then don't need to change the offsets.
by Mark
Tue Apr 26, 2016 4:07 pm
Forum: Extruder
Topic: Weird Rostock G2s Pro Extruder problem
Replies: 8
Views: 4851

Re: Weird Rostock G2s Pro Extruder problem

you might need to check out this link:
http://www.geeetech.com/forum/viewtopic ... 19&t=17097
And note when Z=0mm, if the nozzle is too close to the bed, the filament will not come out fluently too.
by Mark
Tue Apr 26, 2016 4:02 pm
Forum: Extruder
Topic: G2s pro extruder reverse
Replies: 4
Views: 3227

Re: G2s pro extruder reverse

2.4ohms? did you minus the resistance of the multimeter itself? 2.4 ohms is too high for the heatbed, and if it's correct, it can't blow the fuse..maybe a defective fuse? I find the fuse here: http://www.ebay.com/sch/i.html?_odkw=fuse+10A+SMT&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0....
by Mark
Tue Apr 26, 2016 3:54 pm
Forum: Firmware
Topic: How to install the firmware for GT2560
Replies: 134
Views: 261530

Re: How to install the firmware for GT2560

You can download the firmware for your G2S here: http://www.geeetech.com/forum/viewtopic.php?f=20&t=17046 It's based on marlin 1.0.3 dev. And the motors, first make sure they are all correct connected, and then check the driver voltage as this link shows: http://www.geeetech.com/forum/viewtopic.php?...
by Mark
Tue Apr 26, 2016 3:43 pm
Forum: Control Board
Topic: Not printing after control board change
Replies: 11
Views: 7130

Re: Not printing after control board change

Then seems like a hardware problem. Are all your driver boards working properly? I mean the driver voltages, are they all correct? You can check out this link for more details: http://www.geeetech.com/forum/viewtopic.php?f=17&t=17038 Also are your driver boards 4988 or 8825? Can not use 8825 on the ...
by Mark
Tue Apr 26, 2016 3:26 pm
Forum: Products FAQ
Topic: Z Axis Endstop No Signal
Replies: 3
Views: 1868

Re: Z Axis Endstop No Signal

where did you get the instructions? I checked mine, it is correct, plugged in the Z MIN connector.
by Mark
Tue Apr 26, 2016 3:22 pm
Forum: Software
Topic: pausing print
Replies: 3
Views: 2171

Re: pausing print

oh I thought you were printing with the USB, and in that case you can home the X axis manually and quickly. But I don't know how to do this using the SD card, sorry mate.