Search found 7 matches
- Sun Dec 05, 2021 3:04 am
- Forum: A20T
- Topic: After a print, retract filament? Pull back bowden tube?
- Replies: 1
- Views: 2272
Re: After a print, retract filament? Pull back bowden tube?
I once had a jam problem with one of my filaments. My mistakes was to pull the bowden tubes loose from hot end and two extruders. I did this before I figured out how to use extruder at 100% filament flow. I swapped between the two. What I did wrong is I did not get one of the bowden tubes pushed dow...
- Sun Dec 05, 2021 2:52 am
- Forum: A20T
- Topic: Heating problems with CURA
- Replies: 2
- Views: 2810
Re: Heating problems with CURA
//And finaly after first layer 2802 M109 S215 2803 M104 T0 S0 This tell the print head to set temp to 0 T0 is what tells the hot end (Tool) to go to S temp of 0. This code needs to be in the in the "End G Code" under machine management. not in your G code to print your model. 33 M163 S0 P0.33 34 M16...
- Sun Oct 31, 2021 3:16 am
- Forum: A20T
- Topic: Serious stringing problem
- Replies: 1
- Views: 2316
Re: Serious stringing problem
There are many causes to string. Type of filament, temperature and brand. I hope you have solved your stringing issue by now but here is a great guide to printing problems:
https://rigid.ink/pages/ultimate-troubl ... ng-zits-24
https://rigid.ink/pages/ultimate-troubl ... ng-zits-24
- Mon Oct 25, 2021 3:41 am
- Forum: A20T
- Topic: Can’t get A20T extruder unplugged... any suggestions welcome
- Replies: 2
- Views: 2701
Re: Can’t get A20T extruder unplugged... any suggestions welcome
I made the mistake of pulling my bowden tubes out shortly after getting my A20T. I had to also remove the lock for the bowden tube by unscrewing. You need to had the nozzle tube temperature about 240. Take one of the tools to clean out the nozzle the blunt or bigger end and start it down the heat op...
- Thu Oct 21, 2021 7:53 am
- Forum: A20T
- Topic: A20T Wont print on the second extruder
- Replies: 7
- Views: 7602
Re: A20T Wont print on the second extruder
Here is how I solved the problem of using the E2 extruder in Cura. In the upper left hand corner tab you see the name of your printer ( Geeeteck A20T) just to the right you see a down arrow. Choose this option, then choose manage printer. You will see two white windows inside a gray window named "Pr...
- Wed Sep 01, 2021 3:30 pm
- Forum: A20T
- Topic: Arteffects and holes on top and back of test cubes.
- Replies: 1
- Views: 2182
Re: Arteffects and holes on top and back of test cubes.
Well, after doing a lot of reading and printing a lot of test cubes, I solved my problem. Apparently my problem was that the temperature was the cause. I was not printing hot enough. Being new, less than a month with the printer, I had bought more petg filament than PLA. I was using the petg just at...
- Mon Aug 30, 2021 11:56 pm
- Forum: A20T
- Topic: Arteffects and holes on top and back of test cubes.
- Replies: 1
- Views: 2182
Arteffects and holes on top and back of test cubes.
This is my first 3D printer. I have had my A20T for about two weeks. It printed about 5 files as perfect as they were designed. Then it started messing up the top with holes and the back with holes and artifacts. You can see all the way through from top to side. I have read several troubleshooting g...