Hi,
your problem is that the z-axis movement is inverted for the auto-leveling. So it moves up and wonders why there is no contact of the level sensor. I cant find the solution i found back in the days. but somewhere for the A10M or so you have to look for "inverted z-Axis"
Search found 2 matches
- Fri Jan 29, 2021 10:05 pm
- Forum: Geeetech A10 Series
- Topic: Auto leveling problem with A10T
- Replies: 1
- Views: 2162
- Mon Jul 27, 2020 12:36 am
- Forum: A10T
- Topic: First print layer uses 33% 33% 34% filament with cura slicer
- Replies: 1
- Views: 13159
Re: First print layer uses 33% 33% 34% filament with cura slicer
Hi,
had the same issue.
Just check the start g-code of the cura machine settings. There are all three extruders configured. You just need wipe that code out and it will work correctly.
See also https://marlinfw.org/docs/gcode/M163.html
had the same issue.
Just check the start g-code of the cura machine settings. There are all three extruders configured. You just need wipe that code out and it will work correctly.
See also https://marlinfw.org/docs/gcode/M163.html