Geeetech

To make the video risk of definitively breaking the second 3d touch to show you when the pin drops and impacts the print below, please believe it. I tell you, so I try to clarify some fundamental things and ask for clarifications on specific points. For installation and calibration, follow the demon...

I installed the firmware for A10T (GT2560V4 Support 3Dtouch-Beta) and followed all the configuration steps.

I bought a new 3d touch, but unfortunately the situation remains the same. The problem is not related to degaussing, but to the fact that during the initial layers the 3d touch is activated, probably to check the correct distance of the bed. It's okay if you do it outside the object being printed. T...

Thank you for your suggestion. It will be valid for the next 3d touch, because this has completely split into two parts with the electric coil coming out.

At an advanced stage of printing, the pin of the 3d touch has come out, impacting the print below. The pin has deformed and is no longer retracted. The 3d touch continued to rub on the structure of the object to be printed, deforming it completely, until it broke. I hope that in addition to breaking...