Geeetech

nice one good build ill try that myself

I even do this before a new print I prob don't need to but I heat the nozzle and wind the filament back a bit it may miss a bit off the brim but its nothing compared to getting a jammed hot end

hi I found I was getting continual jamming in the hot end when I the Teflon carrier off at the head end it was curled and twisted up inside the filament also had been ground horribly at the extruder as the gear tried to force more filament in to the head but last night I got it it was being caused b...

I know there not perfect by any stretch of imagination but compared to what I started with well its def woo hoo time and hopefully some one can improve on them and point me in the right direction

here is my cura profile that works well for me

if you want a copy of my cura profile just shout

Ade

if you do still want the gcode he will talk you through that too but here is what I used for 8 colours ;virtual extruders for mixed colours ;extruder 1 M163 S0 P1 M163 S1 P0 M163 S2 P0 M164 S0 ;extruder 2 M163 S0 P0 M163 S1 P1 M163 S2 P0 M164 S1 ;extruder 3 M163 S0 P0 M163 S1 P0 M163 S2 P1 M164 S2 ;...

hi if your using cura you can select the individual extruders you wish to print a model from and also set up multi colour prints even as far as setting up virtual extruders for mixing the colours ive just set one up with 8 individual colours 3 of the standard extruders then 5 mixed from the other 3 ...

oh William my friend first attempt failed
it wouldn't do it back to 1.1.8 no bl touch
but second attempt with 1.1.8 with bl touch success

back up with you ********* STAR *********

I DONT KNOW WHAT ID DO WITHOUT YOU

thank you william for your reply ill give it a go

fingers crossed