Search found 84 matches

by DzzD
Wed Nov 04, 2020 9:11 pm
Forum: Geeetech A20M
Topic: Different Nozzles for A20M
Replies: 1
Views: 3939

Re: Different Nozzles for A20M

You can use those nozzle : https://fr.aliexpress.com/item/33009261 ... 6c37waclMF

I use one of 0.6mm hardened steel since a year and it is working very well
by DzzD
Wed Nov 04, 2020 7:53 pm
Forum: Geeetech A20M
Topic: Still massive stringing problems with my A20m
Replies: 15
Views: 56653

Re: Still massive stringing problems with my A20m

Old topic but here are some very interresting informations. Retraction on mixing extruder just do not work as expected, and this is the key of stringing problems. Basically when one side/filament is retracted, it suck from the other side/filament rather than from the nozzle , that's why the retracti...
by DzzD
Fri May 29, 2020 6:22 am
Forum: Geeetech A20M
Topic: Sudden underextrusions
Replies: 7
Views: 14763

Re: Sudden underextrusions

I printed them
by DzzD
Sat Feb 29, 2020 6:53 am
Forum: Geeetech A20M
Topic: TMC2208 steps fail
Replies: 5
Views: 10565

Re: TMC2208 steps fail

Hi,

yes, I had to change the TMC2208 extruders mode via OTP for both extruders and everything goes right now and the extruders are still silent.
by DzzD
Sat Feb 29, 2020 6:49 am
Forum: Geeetech A20M
Topic: A20M Feeder Arm Replacement
Replies: 6
Views: 9175

Re: A20M Feeder Arm Replacement

here : https://www.amazon.fr/Accessoires-dimprimante-Aluminium-dextrudeur-Extruder/dp/B0837LQNQQ/ref=sr_1_3?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=dual+gear+extruder+aluminium&qid=1582929626&sr=8-3 or search for "dual gear extruders aluminium" (be careful as some version are single gear...
by DzzD
Sat Feb 15, 2020 7:53 pm
Forum: Geeetech A20M
Topic: Problème extrudeuse E1
Replies: 20
Views: 26427

Re: Problème extrudeuse E1

Les driver ceux sont les petites cartes (1cmx2cm environ) clipsé sur la carte mère, on peu les enlever et les remettre, ils sont juste "clipsés". Une bonne chose à faire est de les remplacer par des TMC2208 qui sont bien plus silencieux http://www.geeetech.com/forum/viewtopic.php?t=62270 A ma connai...
by DzzD
Mon Feb 10, 2020 4:31 am
Forum: Geeetech A20M
Topic: A20M Feeder Arm Replacement
Replies: 6
Views: 9175

Re: A20M Feeder Arm Replacement

Another one breaked... have a look to this thing https://www.thingiverse.com/thing:3456879 , maybe be you can use your second extruder to print it.

It will probably break again as it have the same design issues (too thin parts)

Also, I will advice to simply replace both extruders with full metal one
by DzzD
Mon Feb 10, 2020 4:28 am
Forum: Geeetech A20M
Topic: Sudden underextrusions
Replies: 7
Views: 14763

Re: Sudden underextrusions

Not surprising they all break... I have replaced mine with all metal (see attached picture), but you can give a try to this thing https://www.thingiverse.com/thing:3456879 , but I am pretty sure it will break too.
by DzzD
Sun Feb 09, 2020 11:15 pm
Forum: Geeetech A20M
Topic: The best choice for bed surface (shared experience)
Replies: 0
Views: 4817

The best choice for bed surface (shared experience)

Here is a post to share my experience on bed surface. After using adesive buildtak, then the geetech superplate (not really cheap...), I finally ended using a 4€ 26x26cm (3mm height) mirror and now the first layer is always perfect and the print detach by itslef when the mirror get cold. Conclusion ...
by DzzD
Sun Feb 09, 2020 10:55 pm
Forum: Geeetech A20M
Topic: Problème extrudeuse E1
Replies: 20
Views: 26427

Re: Problème extrudeuse E1

C'est aussi le cas avec Marlin 2, un seul extruder dans le menu, je vais regarder si il n'y a pas une option de compil...

Pour le moteur qui ne fonctionne pas il faudrait intervertir les drivers sur la carte mère pour vérifier qu'il n'y en ai pas un de grillé