Geeetech

Hi, since a few days I have the same problem. Fluctuating temperatures and MINTEMP errors. when i move the hotend slowly by hand I can see the temperature change to -14°C (yes MINUS). And the DL Touch is initiating when moving the hotend. I Think my problems are shaky contacts. Is there any way to g...

Hi,

sorry for late reply, did not notice you answered the topic.

I got the feeders from amazon.

https://www.amazon.de/gp/product/B07WV6 ... UTF8&psc=1

The strange thing is, only feeder #1 was broken.
Feeder #2 and #3 were different build. They are more solid.

William wrote: ↑

Thu Mar 12, 2020 10:12 am

Hi, If changes are made to the firmware,
hex format firmware is a compiled format,
It cannot be modified.

I know.
I changed settings in VS, build the hex and then I tried to upload

I experienced some problems with feeder.
While changing the feeder I found the cause.
The feeder was broken, If somebody expierence poor extraction check the feeder!
Now I use aluminium dual extruder, they are working much better.

After changing the feeder I need to reverse their direction. I found the place in the firmware and build the .hex file. But now I am again not able to flash, even holding / pressing the reset button in different ways will not work now. After 2 hours holding and pressing the button I gave up. I tried...

Every time I click on "mix color" the programm crashes without errormessage.

tried on twi systems
Win 10 1909 x64

gcode generated with Cury 4.4.0

at least, if there is change, it is not big enough.
The nozzle hits the tower and moves the bed in the wrong direction.
The more colorchanges in the print, the more the nozzles moves the bed. There aer then 3 colors on one layer in the tower.

Nope,
no change of size

Sorry, I can see in the settings of curaengine slicer (NOT CURA itself!) the possibility to change these pameters.
Only