Geeetech

Thanks Vert
I think i may do that as I find the mixing option is quite poor.
I was also considering converting to a 2 in 2 out hot end but i may put this on hold for now.

Thanks William

My issue relates this this post.
https://www.geeetech.com/forum/viewtopi ... 17#p105617

The actual arm on he extruder has broken.
For now i'm inserting an M92 E95 when i use T0 and M92 E430 when using T1 This seams to do the trick.

thanks Vert good point about PLA. I only print in PLA so i'd have to get some ABS. I'll look to prototype it in pla first unless someone's got the file. PLA may work ok if baked but i'm not had a lot of success with baking PLA for strength. Also it shrinks so this will make it harder to calculate. I...

Where did you get the print file for this?
I could really use it.
Mine broken at the same place.

Hi all I've been having issues with my printer recently and it turns out my E0 extruder has broken. The arm has snapped around the pivot point. I bought a new extruder went to alter the Esteps and found out that it's not support with the mixer. I''m a little bit confused what to do at the moment. I ...

I've resolved my issue.
I mounted it too high and also had a blob of plastic on my nozzel. Rookie mistake.
I had to alder the z offset which is really nice in marlin 2

Hi all I've bought a 3d touch and mounted it 3mm above the nozzel with the pin up. Flashed with Marlin 2.0 by vert. The probe appears to be working in self test mode but when homing it crashed into the bed. I'm sure I've mounted it wrong or missed a step somewhere. Can anyone offer any advice. I tho...

Thanks William but it's not an issue with me leviling but more where the nosel sits when it's in manual leveling mode.
Its like it has different offset for leveling as it does for printing.

Has anyone else got issues with Marlin 2.0.x and manual bed leveling. I've levelled my bed using the five step bed leveling process and it's all good. I'm using 2 sheets of a4 paper. Then go to print and the nosel is grinding on the bed. I then re-level the bed and make it so the paper has no resist...

Just an update for anyone who’s interested. The fans are 3010s and 4010s will not fit inside the cage. So I mounted on the outside of the cage and powered it all up to a noisy racket. Maybe slightly quieter than the 3010s. I’ll investigate more tomorrow and check the dB level now. I suspect the age ...