Search found 19 matches

by 3D by EB
Sun Jan 12, 2020 9:51 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

Thanks for the picture......I never thought that the mount was supposed to be attached to the cage, but it makes sense. BTW, I'm not very good with spatial relationships, as I can't do a Rubik's Cube without a book to guide me. I'll get some 3mm screws to mount the hot end, but I won't be able to a...
by 3D by EB
Sat Jan 11, 2020 7:31 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

I have attached the picture showing the 4 screws that mount the adapter bracket to the oem hot end cover.
by 3D by EB
Tue Jan 07, 2020 8:02 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

Ok, I'm currently using the firmware that is posted with the xcr3d adapter bracket. I'm working on some slicer tweaks to get retraction and tool changes done correctly. I beat my head for 3 days pouring over the firmware to find out why the second extruder wouldn't work. Turns out that marlin 2.0 ha...
by 3D by EB
Sat Jan 04, 2020 11:40 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

The mount I designed actually fits inside the OEM cage, so the Bltouch sensor is going to mount the same. The new hot end nozzle is in almost the exact same spot as the OEM, so the part cooling fan works just fine. I did end up routing the wires from the fan on the outside of the cage. Mainly becaus...
by 3D by EB
Wed Jan 01, 2020 8:37 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

I have the XCR3D switching hot end fully installed now. I'm running into overshoot on the hot end temp due to the smaller hot end size.

Looks like I'll need to compile a new firmware configuration so that I can adjust the Bang_Max and Pid_Max settings.
by 3D by EB
Tue Dec 31, 2019 11:37 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

https://www.thingiverse.com/thing:4076158 Here is the mounting bracket as promised. The slicer Gcode will most likely need to be modified to make the filament retract farther when it switches colors. Once I get everything assembled and fully tested, I'll try out some 2 color prints and I will post m...
by 3D by EB
Tue Dec 31, 2019 10:34 am
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

Ok, just finished my mount for the xcr3d hot ends. I'm posting to thingiverse right now. Will post a link here shortly.
by 3D by EB
Mon Dec 23, 2019 6:54 pm
Forum: Geeetech A10 Series
Topic: A10M upgrade to 2 extruder 2 nozzle setup
Replies: 40
Views: 58618

Re: A10M upgrade to 2 extruder 2 nozzle setup

https://www.aliexpress.com/item/4000144309973.html I order the xcr3d 2 in 1 out switching hot end last week. I like that it will not require any modification to the electrical. I will post some build updates when I get it installed. I also ordered their 2 in 1 out mixing hot end. From the looks of i...
by 3D by EB
Wed Feb 27, 2019 10:16 pm
Forum: Configuration Profiles Sharing
Topic: A10M Profile for Simlify3D
Replies: 20
Views: 61000

Re: A10M Profile for Simlify3D

primeraimpresion3d wrote:
Wed Feb 27, 2019 11:21 am
thank you very much friend. Sorry for the translations. Every day I look at the forum because your profiles make the printer work perfectly. I will try it today. thanks again for the contribution.
Comments like this keep me going.
I'm glad it has helped you.

Thanks my friend.
by 3D by EB
Wed Feb 27, 2019 6:48 am
Forum: Configuration Profiles Sharing
Topic: A10M Profile for Simlify3D
Replies: 20
Views: 61000

Re: A10M Profile for Simlify3D

Sorry for the late reply. I wanted to make sure the profile was as good as I could get. I have attached 2 profiles, a standard one and one for if you have a touch sensor installed. Both profiles now work with Simplify3d dual extrusion wizard. **Touch Sensor profile only** The touch sensor profile ha...