Geeetech

Thanks for quick reply, starting to sort things out, did not have much luck with some of the firmware I downloaded, one 1.1.19 version gave me a lot of lay shifting, also the different controllers don't help, ended up downloading 1.1.9 from marlin and building my own.
Tony

Could someone explain why in some Geeetech firmware the DEFAULT_AXIS_STEPS_PER_UNIT for the A10 changes from 80 , 80 ( x y) to 80.3 , 80.8 .

check the cable to the screen is connected correctly blue band up with display down.

If your head cage as the fans on each side and five bolts on top you can fit it in place of the geeetech one, the five bolts clamp the heatsink. I have just fitted one, used the original heat block with a new heatbreak ( thread size is different on the geeetech one larger). In the kit it came with f...

Re firmware A10_Marlin_VB 1.1.18 I have now sorted out the problems that I had after loading this firmare onto my A10 that has the GT2560 Ver B. The pin numbers in the pins_GT2560_VB.h are incorrect and need to follow those in pins_ULTIMAKE.h. You also have to change the direction of the extruder fr...

new posted firmware Geeetech A10 with GT2560VB board has problems, x e steps and y have been changed from 80 to 80.3 and 80.8.
Also when auto home x and y go to home then vibrate and you have to power off the printer.
Had to flash a diffrent firmware to get the printer to work.
Tony