Search found 61 matches
- Sat Sep 28, 2019 1:50 am
- Forum: Geeetech I3 Pro W
- Topic: Control board connector issue
- Replies: 9
- Views: 12056
Re: Control board connector issue
For a short fix and for info, you don't really need the heat bed for printing anyway. It's mainly used for ABS, (which is a pain in the arse to print) so if your mainly PLA don't use the heat bed and grab some https://www.amazon.co.uk/Signstek-Printer-Surface-Platform-220mm/dp/B072BYSB2Y/ref=mp_s_a_...
- Thu Sep 26, 2019 8:40 pm
- Forum: Geeetech I3 Pro W
- Topic: Some of my prints on the Pro W
- Replies: 9
- Views: 14408
Re: Some of my prints on the Pro W
sry for the late reply peeps, i havent been around due to printer nearly burning down due to the dodgy power connector! @bucito76 the firmware i currently use is marlin 1.1.9 as for tips (im not that experienced) try to print slower, im always around 35ms. make sure the printer is calibrated properl...
- Thu Apr 11, 2019 9:10 pm
- Forum: Geeetech I3 Pro W
- Topic: Power supply cable problem - GT2560 a+ nearly burned !
- Replies: 39
- Views: 84059
Re: Power supply cable problem - GT2560 a+ nearly burned !
I have no idea how to solder, I wouldn't feel safe knowing I couldn't disconnect the power if I did and plus, its too late now.
- Wed Apr 10, 2019 1:12 am
- Forum: Geeetech I3 Pro W
- Topic: Power supply cable problem - GT2560 a+ nearly burned !
- Replies: 39
- Views: 84059
Re: Power supply cable problem - GT2560 a+ nearly burned !
that's another printer dead!
my connector has just burnt. checked it after printer lost power during print and its completely burnt out!
NOT HAPPY!! i dont expect to buy a product and then start removing and soldering things from the board when i have no idea about electronics.
my connector has just burnt. checked it after printer lost power during print and its completely burnt out!
NOT HAPPY!! i dont expect to buy a product and then start removing and soldering things from the board when i have no idea about electronics.
- Wed Mar 27, 2019 11:03 pm
- Forum: Geeetech I3 Pro W
- Topic: Some of my prints on the Pro W
- Replies: 9
- Views: 14408
Re: Some of my prints on the Pro W
im using cura for slicing.
profiles and settings will change depending on the model and the material being used and also individual printers so copying settings and profiles dont really work.
profiles and settings will change depending on the model and the material being used and also individual printers so copying settings and profiles dont really work.
- Mon Dec 24, 2018 12:03 am
- Forum: Geeetech I3 Pro W
- Topic: Power supply cable problem - GT2560 a+ nearly burned !
- Replies: 39
- Views: 84059
Re: Power supply cable problem - GT2560 a+ nearly burned !
apologies but i know nothing about electronics so that post made no sense to me at all.
- Sun Dec 23, 2018 10:41 pm
- Forum: Geeetech I3 Pro W
- Topic: Power supply cable problem - GT2560 a+ nearly burned !
- Replies: 39
- Views: 84059
Re: Power supply cable problem - GT2560 a+ nearly burned !
i have been keeping an eye on my molex after i saw this and its started to do the same thing!
WTF geeetech!?!?!?!
only thing ive been doing different is running the bed at 70 instead of 50.
I am no longer using this printer as it is not safe!
WTF geeetech!?!?!?!
only thing ive been doing different is running the bed at 70 instead of 50.
I am no longer using this printer as it is not safe!
- Sat Nov 03, 2018 10:01 pm
- Forum: Geeetech I3 Pro W
- Topic: Problem with LCD wheel.
- Replies: 3
- Views: 5893
Re: Problem with LCD wheel.
if you are using marlin 1.1.8 under the config tab in marlin, u need to scroll down to line 1388 until u see this // This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // //#define REVERSE_ENCODER_DIRECTION // // This option reverses t...
- Sat Nov 03, 2018 9:50 pm
- Forum: Geeetech I3 Pro W
- Topic: Firmware loaded without change
- Replies: 6
- Views: 9743
Re: Firmware loaded without change
try doing the initialize eeprom from the LCD after you have uploaded your changes. this worked for me when i was trying to change my z steps.
- Tue Oct 30, 2018 2:10 am
- Forum: Geeetech I3 Pro W
- Topic: CuraEngine Configurations
- Replies: 1
- Views: 4435
Re: CuraEngine Configurations
just use cura, its free and better than repetier in my opinion
also using other peoples configs might not work for yours, as they are configured for the individuals printer.
also using other peoples configs might not work for yours, as they are configured for the individuals printer.