Search found 1438 matches
- Tue Oct 22, 2019 2:38 am
- Forum: Update Announcement/Product Release
- Topic: New GT printer controllers.
- Replies: 0
- Views: 22724
New GT printer controllers.
Hello. :mrgreen: I am pleased to inform you that the new controllers for GT printers will soon be in the hands of customers. :D Newly designed controller boards were created. For 8-bit version: GT2560-V4.0 For 32-bit version: Smartto-V1.0 Thanks to the courtesy of the GT staff, I can present new des...
- Thu Oct 17, 2019 1:47 am
- Forum: Geeetech A30 Series
- Topic: Z-Axis shift between left and right!!!
- Replies: 2
- Views: 4734
Re: Z-Axis shift between left and right!!!
Hello tomriddlepotter.
Your idea is not a bad one, but it will also eliminate another phenomenon you don't know about yet.
Your idea is not a bad one, but it will also eliminate another phenomenon you don't know about yet.
- Thu Oct 17, 2019 1:45 am
- Forum: Geeetech A30 Series
- Topic: Replacing the board
- Replies: 3
- Views: 6292
Re: Replacing the board
Hello. :mrgreen: If this controller board has sufficient number of control inputs and outputs you can start this experiment. First of all, look for a firmware with the right functionality you want. Then you have to read a lot about how to connect the sensors. You need to know the order of the leads ...
- Thu Oct 17, 2019 1:23 am
- Forum: Geeetech A30 Series
- Topic: Printing multiple colours
- Replies: 4
- Views: 6758
Re: Printing multiple colours
Hi.
Greetings and good luck with your experiments.
Greetings and good luck with your experiments.
- Thu Oct 17, 2019 1:21 am
- Forum: Others
- Topic: Prusa I3 Pro B - Problem with Y axis
- Replies: 8
- Views: 24747
Re: Prusa I3 Pro B - Problem with Y axis
Hi
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model
Greetings to you, sir.
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model
Greetings to you, sir.
- Tue Oct 15, 2019 7:36 pm
- Forum: Others
- Topic: Prusa I3 Pro B - Problem with Y axis
- Replies: 8
- Views: 24747
Re: Prusa I3 Pro B - Problem with Y axis
Hello.
this is called layers shifting, it can be solved successfully.
this is called layers shifting, it can be solved successfully.
- Mon Oct 14, 2019 7:18 pm
- Forum: Geeetech A20M
- Topic: I have a problem with the extruder.
- Replies: 3
- Views: 5571
Re: I have a problem
Hello. :mrgreen: This happens when the filament does not find an outlet, or is fed too quickly. So it's worth it: Level the heated bed, Adjust the gap between the nozzle and the heated bed surface, Adjust the temperature of the hot end, Check that the Teflon Bowden tubes are properly cut and suffici...
- Mon Oct 14, 2019 7:07 pm
- Forum: Geeetech A20M
- Topic: Where can I buy a new extruder for my printer
- Replies: 4
- Views: 6510
Re: Where can I buy a new extruder for my printer
Hello.
You can always make a purchase in the company shop.
https://www.geeetech.com/2-in-1-out-dua ... -1038.html
You can always make a purchase in the company shop.
https://www.geeetech.com/2-in-1-out-dua ... -1038.html
- Mon Oct 14, 2019 2:41 pm
- Forum: Geeetech I3 Pro B
- Topic: Chang I3 Dual into M201 Version
- Replies: 2
- Views: 4164
Re: Chang I3 Dual into M201 Version
Hello huyenvu111
In my opinion, your goal can be achieved with an existing version of the controller.
Of course, some accessories will need to be replaced.
I suggest that you start your project by finding the firmware in the required version for your controller board.
In my opinion, your goal can be achieved with an existing version of the controller.
Of course, some accessories will need to be replaced.
I suggest that you start your project by finding the firmware in the required version for your controller board.
- Mon Oct 14, 2019 1:20 am
- Forum: Software
- Topic: easy print 3D scratch slicer
- Replies: 2
- Views: 6016
Re: easy print 3D scratch slicer
Hello.
EasyPrint has not been developed by GT for some time now.
Therefore, there may be some conflicts.
It's a pity, but we can't influence it
EasyPrint has not been developed by GT for some time now.
Therefore, there may be some conflicts.
It's a pity, but we can't influence it