Geeetech

The silver port is for the included usb cable.

Have you tried using the Repetier Host software to change the values? that would be faster than firmware updates or the knob.

William Don't the Pro B and C use the same control board? Why wouldnt you be able to mount the touch sensor?

Xaroos, You can find lots of different mounting brackets on thingiverse. What exactly is your trouble, maybe we can figure something out together.

Greg.

If you use Repieter Host to connect to your printer you can just change the settings that way each time. It is much faster than using the knob or changing the firmware settings.

Why did you need to make the Y size so large?

I still have not heard from anyone about the issues I posted! Apparently Geeetech just wants to get your money and then ignore anyone who isnt willing to pay for the privilage to test their equipment and give positive reviews! How is it you have somone listed as your "product experience officer" but...

That looks like the correct part to me. In the video he keeps showing how it wont slide in, thats because it has to be threaded in. His old one had all the threads striped off thats why it looked different.

You do not get the option to move the Z axis 10mm, only 1mm at a time from the display.

In the video you said Z kept going to zero? Is the end stop plugged into the correct port? Are the wires on the correct pins on the switch?

After all the messages I have sent to the Admin this is the only reply I have received. It is very disappointing that Geeetech cant make the time to address these issues with more than a Thanks for the feedback post.

I did a quick search and found this.

https://forum.arduino.cc/index.php?topic=28223.0

can you send me the gcode you used? the problem may be the .stl not your printer. do you know what the settings are on your printer? speed, steps per mm for x and y, etc. does this happen with all circles? try printing this quick test print and see what you get. https://www.thingiverse.com/thing:102...