Geeetech

[quote=sonesh post_id=83052 time=1520549780 user_id=64324]
Could you share where you got 1.1.8 for Pro B from?
[/quote]

viewtopic.php?f=20&t=60548

Update to my above post.

I have now updated to 1.1.8 without issue on my Pro B without a 3DTouch/BLTouch fitted.

If you don't use a 3DTouch, comment out the following in configuration.h: #define BLTOUCH #define AUTO_BED_LEVELING_BILINEAR #define Z_SAFE_HOMING Please Note: I haven't tested 1.1.8 on my Pro B but I do use 1.1.4 for 3DTouch without issue (I don't have my 3DTouch fitted) making the above changes ON...

The above issue of mine has been resolved by commenting out "#define Z_SAFE_HOMING"

Thanks again for this Niklas!

hmm, my auto home seems to send the head to the center of the bed when homing Z (after homing X & Y correctly)? Please note that I am NOT usiung the 3DTouch. My Settings: // Travel limits after homing (units are in mm) #define X_MIN_POS -15 #define Y_MIN_POS 5 #define Z_MIN_POS 0 #define X_MAX_POS 2...

hmm, my auto home seems to send the head to the center of the bed when homing Z (after homing X & Y correctly)? Please note that I am NOT usiung the 3DTouch. My Settings: // Travel limits after homing (units are in mm) #define X_MIN_POS -15 #define Y_MIN_POS 5 #define Z_MIN_POS 0 #define X_MAX_POS 2...

Flashed fine on my Pro B without probe (after making the changes to disable the probe and entering my Z/E steps).
Will test a print later.

Thanks for this Niklas

Started a new thread: http://geeetech.com/forum/viewtopic.php?f=20&t=19897 I saw that someone else also posted 1.1.4 but I post my version anyways. ;-) I will probably not update this thread anymore. The releases for the stable version is more frequent now compared with before. Hi Niklas, What do I...

Flashed fine on my Pro B without probe (after making the changes above and entering my Z/E steps).
Will test a print later.

Thanks for this NiklasO

Although the pitch is 2mm, you have 4 starts so its 1600/4