Search found 116 matches

by Toy
Sun Oct 09, 2016 11:25 am
Forum: Others
Topic: M301 rostok issue
Replies: 11
Views: 6855

Re: M301 rostok issue

Could you tell me how the stopping looks like? Did the LCD reset? How about the fan? Does it seem like the whole system reset itself or just the motor stops? If it's just the motor, then I think there maybe something wrong with the motor driver, or there's a poor contact somewhere, you can re plug a...
by Toy
Sun Oct 09, 2016 11:00 am
Forum: Products FAQ
Topic: Z AXIS BLOCKED in one direction
Replies: 22
Views: 11148

Re: Z AXIS BLOCKED in one direction

First you need to make sure z axis is installed well, the rods can move smoothly when you move it by hand. You can release the motors from z axis, then activate the motor in repetier, see how it rotates, you can check if it's the problem of motor, the driver or the motor wire according to the link: ...
by Toy
Sun Oct 09, 2016 10:37 am
Forum: Assembly
Topic: i3 Acrylic pro B; impossible to mount motor on bed
Replies: 3
Views: 2610

Re: i3 Acrylic pro B; impossible to mount motor on bed

Which part is 155mm?
In the instructions you can see you need to use M3X20 screws not M3X16.
1009.png
1009.png (3.15 KiB) Viewed 2605 times
by Toy
Sun Oct 09, 2016 10:03 am
Forum: Firmware
Topic: How to install the firmware for GT2560
Replies: 143
Views: 273575

Re: How to install the firmware for GT2560

Hi, need Help. :shock: my GT2560 Board will not respond after FW Update with Arduino 1.6.12 How can i recover the board GT 2560 / REV A ? Usaing a Prusa X3 Pro. Have you uploaded the correct firmware? Have it been uploaded successfully? You can reload the firmware for your printer in this link, see...
by Toy
Sun Oct 09, 2016 10:00 am
Forum: Products FAQ
Topic: Prusa i3 Pro C 2 in 1 out extruder
Replies: 3
Views: 2140

Re: Prusa i3 Pro C 2 in 1 out extruder

Hi,
The 2 in 1 out hotend need two extruders to feed the different colors of filament.
Also to get the mixer funtion, you need a GTM32 board to replace the GT2560.
by Toy
Fri Sep 30, 2016 12:00 pm
Forum: Control Board
Topic: GTM32, GTM32 pro
Replies: 8
Views: 6478

Re: GTM32, GTM32 pro

Hi Lami,
Can you inform me of your order number?

Thanks
by Toy
Fri Sep 30, 2016 11:42 am
Forum: Others
Topic: Me Creator 2
Replies: 26
Views: 20461

Re: Me Creator 2

Sorry the file is not available.
by Toy
Fri Sep 30, 2016 11:33 am
Forum: Control Board
Topic: Prusa I3 A Pro Driver Board Not Working
Replies: 4
Views: 2776

Re: Prusa I3 A Pro Driver Board Not Working

OPening the box doesn't affect the warranty. You can just open it and check the connection. If all the connection is okay, you can unplug all the drivers and see if the heating problem still exists, if so, then I think there's something wrong with the board, maybe the mosfet is short, you can check ...
by Toy
Fri Sep 30, 2016 11:10 am
Forum: Extruder
Topic: Problems with temperatures
Replies: 4
Views: 2419

Re: Problems with temperatures

Is the printer M201 or other version?
You can try reloading the firmware, see if it will be better.
Download the firmware here:
http://www.geeetech.com/forum/viewtopic ... 20&t=17046
by Toy
Fri Sep 30, 2016 11:06 am
Forum: Firmware
Topic: Cant upload my firmware
Replies: 11
Views: 6067

Re: Cant upload my firmware

You can try the firmware for A pro which uses the LCD12864,
see if it works.
http://www.geeetech.com/forum/download/file.php?id=2100