Search found 5 matches

by skipperhvac
Sat Jul 18, 2015 10:03 am
Forum: Control Board
Topic: Firmware i3 pro C black white board
Replies: 8
Views: 6705

Re: Firmware i3 pro C black white board

Yes I have found that if I go to Control on the LCD and scroll down to Reset failsafe my extruders will work, However I am finding that I have to do that everytime I turn off then back on.
by skipperhvac
Tue Jul 07, 2015 7:56 am
Forum: Control Board
Topic: Firmware i3 pro C black white board
Replies: 8
Views: 6705

Re: Firmware i3 pro C black white board

I would also like to say that I have heated the heads to 185/220c while testing. The firmware went in great, but still no feed either motors. Have tried many different stl files. This is my second printer, so I do have experience using them. and am proficient at soldering and basic electronics. I re...
by skipperhvac
Mon Jul 06, 2015 6:36 pm
Forum: Control Board
Topic: Firmware i3 pro C black white board
Replies: 8
Views: 6705

Re: Firmware i3 pro C black white board

I installed the firmware and now have all my options on the LCD back , but my extruders still are not running. It seems I've tried everything.
As said in my first post the Extruder Steppers and the driver boards are working when switched to the other axis on the board.
What do I do now?
by skipperhvac
Mon Jul 06, 2015 11:50 am
Forum: Control Board
Topic: Control board problem
Replies: 1
Views: 1518

Control board problem

Thank you for sending the Firmware so quick. I uploaded and have my options back, but when printing the Extruders do not move, tried several things, motors are good, and the driver boards work when swapping with X Y and Z . However the Extruders when plugged in their correct positions Bob nathotel@g...
by skipperhvac
Mon Jul 06, 2015 11:10 am
Forum: Control Board
Topic: Firmware i3 pro C black white board
Replies: 8
Views: 6705

Firmware i3 pro C black white board

I received my printer last week, I finished building on Saturday. Tested a print of test block. Had some trouble, will not feed filament, tested the stepper motors on x axis terminal and they work. I switched stepper drivers, and still did not work. Then following your information used Arduino and M...