Geeetech

Hi

I was thinking of updgrading my mk2 with mk4 Aluminium hot bed with 3mm thick.
I want to print directly onto the aluminium hot bed .
I have Sangulopolou 1.3 can it handle the heat for the 3mm thick.
or it will burn out my moset on my Sangupololu 1.3

Thank

HI

What is the max memory sd card I can use.
8g,16g, 32 gig etc...
what is the max speed it will work.
class 10 uhs-1.

I want to buy a memory card for it, want to make sure it will work.

Hi

for the woman figure,
0.2 layer height
0.3 first layer
speed mostly 30mm/s
Shrink sale to 75%
infil 15%

about 3.5 hours.

What nozzle size are you using, and what layer height are you using....is it MK8 extruder?
Thank

Hi

Attach is file.
I print 0.2mm layer
first layer 0.35mm
nozzle 0.4mm
infil 15%
speed 30mm/s for most.

Does your test printer from company has banding every 5 layers.

I print a 20mm cube.
Actual measure is 19.2mm z, and 19.1mm for side.
banding occurs every 5 layers or so.

Do you have any other suggestion.
The only other I can think off is the wobble of the z-axis rode. bend not straight.

HI, I tried tighten the x axis and y-axis. Same thing. Print: banding every 5 layers same size as the z-axis M8 rod (which is 1.25mm) Questions: is I3 Pro using Z Rod M8 > 1.25mm correct???? 200x16/1.25=2560 step for 1mm. so 2560* 0.2 mm layer = 512 even number so OK> But the x axis and yaxis.... wh...

Hi Does anyone have this problem. i3 pro with sangupolol 1.3. repetier, windows 7. Nozzle 0.4mm, layer height 02.m speed set to 30mm/s for all. Every print I do, and every 5 layers I have banding on the object. I double check the banding is about the same size aas the Z-rode thread. Is it because th...

Hi After 3 months of fixing and waiting for parts, I manage to print something now. I3 Pro with Sangupolol 1.3 nozzle 0.4mm. But something is wrong with the printing see picture below. Print top and bottom surface is OK, but the side has lines. (my friend printer with 0.4 nozzle print with smooth su...

Hi

My nozzle was clog for Mk8. So I took it apart and clean it.
1.75mm nozzle 0.3mm.

Anyway, a piece of PTFE Tube for 1.75 fell off.
I didn't see where it come from. Do you have a picture of Pteee tube 1.75mm where I should put back into mk8 extruder.

Thank