2019.08.06
Replace the E180 firmware of the quick release head with a metal head extruder, specifically remove the password lock screen function, and lower the maximum temperature of the extruder to 240 degrees.

Firmware version V2.02.02

Motherboard application: E180_M04_V2_02.bin

LCD screen application: E180_S01_V2_02.bin



The SD card needs to be formatted before use, as shown in the attached picture. Note that you need to eject the SD card before removing it from the computer.

The motherboard application program uses the "firmware_tool_V2.0" programming tool for programming, and must be a firmware_tool tool of V2.0 or higher.