Get your ideas come to life!
Bring a touch of originality and modernity to your succulents or cacti in pots with this Pot / pot cover design, geometric, printed in 3D Wooden. No need to repot your plants or cacti, you can put your pot directly (standard 9cm diameter) inside! Its clean lines, inspired by origami, and material will bring a […]
Today we will continue with our topic on “troubleshooting guide to 19 common 3D printing problems”, and provide practicable solutions for you 3D printing hobbyists! 3D Printing Problems #10: Over-Extrusion What’s the 3D Printing Problem? Over-extrusion means that the printer supplies more material than needed. This results in excess material on the outside of the […]
Frustrated with Fused Filament Fabrication? Read our 3D printer troubleshooting guide to the most common 3D printing problems and their solutions. You’ve checked the model, and seen countless others make it without issue, but try as you might it just won’t print. What is it that keeps going wrong? This article will help you to […]
Stuck for ideas for what to 3D print? Bored of pointless trinkets and doodads? A list of cool things to 3D print which are genuinely useful. Like us, you’re tremendously excited by the possibilities of 3D printing. Unfortunately, the landscape is cluttered with trinkets, doodads and ornaments. We’re in danger of drowning in 3D-printed objects […]
Here are six new guides to post-processing for 3D printing, including how to sand, glue, and paint 3D printed items. This short article shows how to achieve a perfect surface finish, as well as how to make silicone molds from 3D prints and how to carry out vacuum forming. Post-processing opens up a world of interesting […]
Hi, you guys ~ Today we will continue to share another ten dual extruder 3D printer models to satisfy your curiosity for the fabulous 3D printing world! ! Dual Extruder 3D Printer Models #11: Two-Color Octopus Oh hey, did you think nervoussystem would stop at a mere frog? Nope! Here’s a two-color octopus… (Download from […]
Need an advanced and colorful challenge? Here are 35 free dual extrusion models specially designed for your dual extruder 3D printer. 3D printing is a fun hobby, and one that you can make as simple or as complicated as you like. Making stuff in a single material, for example, is pretty much the standard option […]
Do you want to get the best results from your 3D printer? Here are the best 3D slicer software tools – most of them are free.So, what does a 3D slicer software do? A 3D slicer is a piece of software, running on a computer. It acts like an interpreter for your 3D printer. You […]
