Forgot your password?
No account?
Register one!
This 3 in 1 out hotend kit is upgraded to enhance the printing performance of Kossel or Rostock 3D printers.
The hotend is re-designed to reduce the rate of clogging or jamming. We have designed the nozzle to have smallest possible mixing chamber to make color shifts as fast as possible and to avoid unnecessary filament waste. Besides, to ensure rapid nozzle heat up, 3 heater rods of the same power are adopted to guarantee uniform heating of the mixed filament.
Based on the principle of the three primary colors, the three kind of different colored filament will be fed in accordance with a certain percentage of feeding rate. Then they will be melted and mixed in the nozzle chamber to generate another new color or mixed color, enrich your printing life.
If you want to use it on other printer, you will need to make modifications according to your project. Welcomed to share your fantastic idea with us in our forum.
Main features:
1. 3 in 1 out hotend supports 3 filaments of different colors and different materials.
2. Creating printings with a wide range of colors and materials in a single object, in one print.
3. All-metal, high performance J-head with efficient heat dissipation for fantastic printing.
6. All-metal accessories to withstand higher temperatures involved in printing process so that you can print with multiple kinds of filament that requires higher temperature such as ABS of higher strength.
Tips: Different materials of filament has different melting point, when printing with two different kinds of material, please choose those with close melting point.
1. Number of filaments: 3
2. Filament material: PLA
3. Filament size: 1.75mm
4. Nozzle size: 0.4mm
5. Heater cartridge: 3*20 W, 12V; size: 6*15mm
6. Heater cartridge wire length: 650mm
7. Thermistor: PT3-25E2-S2
8. Thermistor wire length: 650mm
9. Working Temperature: 190°-230°
10. Cooling fan:3010-12V-0.12A-9000RPM
11. Cooling Fan: 30 x 30 x 10 mm
12. Cooling fan wire length: 1200mm
13. Fan voltage: 12V
14. Net Weight: 324g
15. Gross weight: 400g
1* 3 in 1 out hotend
2 * cooling fans
2* cooling fan wires
3* Heater cartridge wires
1* thermistor wire
Hi the manual posted explains how to assemble the piece but does not explain how to swith it with the original hot end of a rostock 301 Please advice or compliment the instructions please.
please send mails to jocelin.jia@geeetech.cn, will tell you , thanks
Where is download, checked forum and here and do not see any instructions for this for conversion. No mention of this in forum either.
wensite
where on website, cant find it.
sorry, now is available.
Thanks, do you connect all 3 heating rods to one extruder or one each extruder ?
Where can I find a manual for uppgrade with this hottend?
u can download it on website now.
Hi, I have one more question, it says that you can print ABS and other filaments with this, how come the temp rating is 190 to 230 C, I couldnt print ABS with this nozzle at that low temp rating. What is the proper temp range for this nozzle? Wish you would have put out this was coming out, just ordered the older nozzle right before it came off your website, wish you would have contacted me and asked if i wanted updated one.
yes,it can up to 230 dgree, it has three heater. ABS PLA is no problem
Can you change out the nozzle or is it part of the hot end like the last design?
the nozzle can change it, it's totally different than previous one.
What kind of nozzle can you switch with? Does it have to be a special one?
TERMS OF USE
HELP CENTER
COMPANY INFORMATION
MEMBER AREA