Your Shopping Cart is empty.

  • XBee 1mW Wire Antenna multipoint-Series 1(802.15.4)
    • i i
    • images/l/Geeetech_XBEES1_1.jpg images/l/Geeetech_XBEES1_1.jpg
    • images/l/Geeetech_XBEES1_2.jpg images/l/Geeetech_XBEES1_2.jpg
    • images/l/Geeetech_XBEES1_3.jpg images/l/Geeetech_XBEES1_3.jpg
    • images/l/Geeetech_XBEES1_4.jpg images/l/Geeetech_XBEES1_4.jpg
XBee 1mW Wire Antenna multipoint-Series 1(802.15.4)


Shipping Weight:70g

Free Shipping!


Vote for specials.

0 votes


XBee OEM RF modules are embedded solutions providing wireless end-point connectivity to devices.
This is a popular 2.4GHz low-power XBee module from Digi. These modules use the IEEE 802.15.4 networking protocol (the basis for Zigbee) for fast point-to-multipoint or peer-to-peer networking and wrap it into a simple to use serial command set, and these usually referred to as S1 modules. They are designed for high-throughput applications requiring low latency and predictable communication timing. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Note: If you are using these outside, please check with your local laws regarding radio communication.


Compatibility Note:

XBee and XBee-PRO 802.15.4 modules are compatible with other devices that use XBee 802.15.4 technology. These include ConnectPort X gateways, XBee and XBee-PRO adapters, and other products designated with the 802.15.4 product name. Devices that do not have the 802.15.4 product name, including Digi's line of DigiMesh and XBee ZB products, are not compatible with XBee and XBee-PRO 802.15.4 modules



Power output:    1mW (+0 dBm) North American & International version   

Indoor/Urban range:    Up to 100 ft (30 m)    Up to 300 ft (90 m)

Outdoor/RF line-of-sight range:    Up to 300 ft (90 m)  

Receiver sensitivity:    -92 dBm

RF data rate:    250 Kbps    

Operating frequency:    2.4 GHz    

Interface data rate:    Up to 115.2 Kbps    



Spread spectrum type:    DSSS (Direct Sequence Spread Spectrum)

Supported network topologies:    Point-to-point, point-to-multipoint, & peer-to-peer

Error handling:    Retries & acknowledgements

Filtration options:    PAN ID, Channel, and 64-bit addresses

Channel capacity:    16 Channels    

Addressing:    65,000 network addresses available for each channel



Supply voltage:    2.8 - 3.4 VDC (XBee Footprint Recommendation: 3.0 - 3.4 VDC)

Transmit current:    45 mA (@ 3.3 V) boost mode 35 mA (@ 3.3 V) normal mode    

Receive current:    50 mA (@ 3.3 V)    

Power-down sleep current:    <10 µA at 25° C    



Frequency band:    2.4000 - 2.4835 GHz

Interface options:    3V CMOS UART


Physical Properties

Size: 2.8cm x 2.5cm

Weight    0.10 oz (3g)

Antenna:    wired whip antenna

Operating temperature:    -40° C to 85° C (industrial)

For more information, please kindly check our wiki page.



Digi XBee Page


Product Manual

Dimensional Drawings

Bildr Tutorial

Digi Examples and Guides

login or register to add your words.