Difference between revisions of "Tiny6410"
From Geeetech Wiki
(→Specification: Stamp Module) |
(→Specification: SDK-Board) |
||
| Line 20: | Line 20: | ||
==Specification: SDK-Board== | ==Specification: SDK-Board== | ||
| + | *Dimension: 180 x 130 mm | ||
| + | *EEPROM: 1024 Byte (I2C) | ||
| + | *Ext. Memory: SD-Card socket | ||
| + | *Serial Ports: 4x DB9 (RS232) | ||
| + | *IR: Infrared Receiver | ||
| + | *USB: 1x USB-A Host 1.1, 1x miniUSB Slave 2.0 | ||
| + | *Audio Output: 3.5 mm stereo jack | ||
| + | *Audio Input: 3.5mm jack | ||
| + | *Ethernet: RJ-45 10/100M (DM9000) | ||
| + | *RTC: Real Time Clock with battery | ||
| + | *Beeper: PWM buzzer | ||
| + | *TV Output: CVBS | ||
| + | *LCD: 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays and VGA Board | ||
| + | *Touch Panel: 4 pin (resistive) | ||
| + | *User Inputs: 8x buttons and 1x A/D pot | ||
| + | *Expansion headers (2.0 mm) | ||
| + | *Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter) | ||
| + | |||
==Stamp Module== | ==Stamp Module== | ||
==DK-Board + Stamp Module== | ==DK-Board + Stamp Module== | ||
Revision as of 02:50, 13 December 2011
Contents
Tiny6410 | S3C6410 ARM11 Stamp Module
FriendlyARM Tiny 6410 Stamp Module with 533 MHz Samsung S3C6410 ARM11 processor.
Specification: Stamp Module
- Dimension: 64 x 50 mm
- CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
- RAM: 128 MB / 256 MB DDR RAM, 32 bit Bus
- Flash: 256 MB / 1GB NAND Flash
- Serial, SPI, USB, LCD, CMOS Camera *Analog Input and Output
- User Outputs: 4x LEDs
- Expansion headers (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
- OS Support
- Windows CE 6
- Linux 2.6
- Android
- Ubuntu
Specification: SDK-Board
- Dimension: 180 x 130 mm
- EEPROM: 1024 Byte (I2C)
- Ext. Memory: SD-Card socket
- Serial Ports: 4x DB9 (RS232)
- IR: Infrared Receiver
- USB: 1x USB-A Host 1.1, 1x miniUSB Slave 2.0
- Audio Output: 3.5 mm stereo jack
- Audio Input: 3.5mm jack
- Ethernet: RJ-45 10/100M (DM9000)
- RTC: Real Time Clock with battery
- Beeper: PWM buzzer
- TV Output: CVBS
- LCD: 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays and VGA Board
- Touch Panel: 4 pin (resistive)
- User Inputs: 8x buttons and 1x A/D pot
- Expansion headers (2.0 mm)
- Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
