Difference between revisions of "Tiny210"

From Geeetech Wiki
Jump to: navigation, search
(Software)
Line 90: Line 90:
 
Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
 
Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
  
 
+
[[File:Sys overview1.jpg]][[File:Sys overview2.jpg]]
  
 
== Tiny210 with LCD Overview ==
 
== Tiny210 with LCD Overview ==

Revision as of 08:21, 23 February 2012

Overview

Tiny210overview.jpg

  • 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
  • 512MB DDR2 RAM and 1GB NAND Flash
  • LCD/Touch Screen, HDMI,TV out, Audio support
  • TF card, USB Host/OTG support
  • Ethernet, WiFi, serial port, GPIO
  • Contain CPU board
  • Linux 2.6.35 & Android 2.3 support

CPU board Hardware info

Cpu top.jpg Cpu bottom.jpg

CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz
FLASH: SLC NAND Flash: 256MB/1GB

Multi-IO: 2 x 60 Pin 2.0mm space DIP connector
1 x 30 Pin 2.0mm space DIP connector
1 x 51 Pin 1.0mm space SMD connector

on Board: HDMI interface 4 x User Leds(Green)
1 x Power Led(Red)
Supply Voltage from 2V to 6V

Mechanical: Dimension: 64x 50x 11mm

Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Tiny210Mother board

Tiny210motherboard.png

  1. Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
  2. AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directly connected using a CCD camera
  3. RS485: 1 RS485 interface
  4. Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
  5. keys: 8 key
  6. RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
  7. Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
  8. USB Slave: 1 Road, the USB 2.0 specification
  9. Infrared receiver: 1
  10. ADC input: 6 ADC input
  11. Buzzer: 1, control by the PWM0
  12. EEPROM:AT24C08 (256 Byte) for I2C test
  13. LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD
  14. SDIO interface: used to connect the SDWiFi module and other
  15. CMOS Camera interface: used to connect CMOS camera
  16. RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
  17. PCB layer: 2
  18. PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
  19. Power supply: DC-5V

Software

Linux&Android 2.3

  • Boot loader

verison: Superboot-210
Function: support boot and update system by TF-card(superboot)

  • Linux kernel

verison: Linux-2.6.35
Compile: arm-linux-gcc-4.5.1-v6-vfp

  • Device Driver

TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver

  • File Systemsupport

Ubi filesystem, yaffs, ext2/3,

  • Function use example

Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support
OMS Camera support, 3G support(WCDMA, CDMA2000)
USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen
Dynamic Wallpapers


Linux

  • Boot loader

verison: Superboot-210
Function: support boot and update system by TF-card(superboot)

  • Linux kernel

verison: Linux-2.6.35
Compile: arm-linux-gcc-4.5.1-v6-vfp

  • Device Driver

TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog,RTC, keyboard
WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3Gdriver

  • File Systemsupport

Ubi filesystem, yaffs, ext2/3

  • Graphics system

Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Sys overview1.jpgSys overview2.jpg

Tiny210 with LCD Overview